Lexmark E360D series (Deutsch) Ergänzendes Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf (Deutsch) Ergänzendes Handbuch für Drucker Lexmark E360D series herunter. Lexmark E360D series 9 Seiten. Loading paper
Auch für Lexmark E360D series: Einrichtung und Installation (2 seiten), Broschüre & Specs (4 seiten), Broschüre & Specs (4 seiten), Kurzreferenz (2 seiten), Ergänzendes Handbuch (5 seiten), Handbuch zur Fehlersuche (8 seiten)

Grasp the handle, and pull the extension so it flips forward.

Guide the extension down gently so the multipurpose feeder

is extended fully and open.

Loading the multipurpose feeder

Squeeze the tab located on the right width guide, and move

the guides out fully.

Prepare the paper or specialty media for loading.

•

Flex sheets of paper or paper labels back and forth to

loosen them, and then fan them. Do not fold or crease the

paper or labels. Straighten the edges on a level surface.

•

Hold transparencies by the edges, and then fan them.

Straighten the edges on a level surface.

Note: Avoid touching the print side of the transparencies.

Be careful not to scratch them.

•

Flex a stack of envelopes back and forth to loosen them,

and then fan them. Straighten the edges on a level surface.

Note: Fanning prevents the edges of envelopes from

sticking together. It also helps them feed properly to

avoid jams. Do not fold or crease envelopes.

Load the paper or specialty media.

Notes:

•

Do not force any paper into the multipurpose feeder.

Overfilling may cause jams.

•

Do not exceed the maximum stack height by forcing paper

or specialty media under the stack height limiters which

are located on the guides.