Gardena accuCut 2417 Betriebsanleitung - Seite 6

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Trimmer Gardena accuCut 2417 herunter. Gardena accuCut 2417 12 Seiten. Turbotrimmer

Gardena accuCut  2417 Betriebsanleitung
Start Trimmer :
F
G
Trimming along lawn edges
and in awkward places :
C
6. Putting out of Operation
Storage / Overwintering :
Disposal :
(in accordance with
RL 2002 / 96 / EC)
Disposal of
batteries :
Switch on Trimmer :
1. Press and hold down starting lock-out
G
button
2. Release starting lock-out
Switch off Trimmer :
v Release Start button
1. For vertical cutting, loosen the tightening
C
nut
, turn the additional handle
and then tighten the nut
2. Swivel the plant guard
the park position until it clicks into place.
D
3. Lift the Turbotrimmer by the handle and
additional handle
cutting position.
4. When trimming e.g. joints between slabs,
hold the Trimmer so that the blade just
skims the slabs.
The Turbotrimmer must be stored out of the reach of children.
1. Clean Trimmer (see 7. Maintenance).
2. Remove blade from blade carrier for storage
(see 8. Troubleshooting).
3. Charging the battery (see 4. Initial Operation).
4. Store the Trimmer in a dry place protected from frost.
The device must not be added to the normal household waste,
it must be disposed of in accordance with local regulations.
The GARDENA Accu-Trimmer contains lithium-ion batteries that
should not be discarded with normal household waste at the end
of their life.
Li-ion
Please return the lithium-ion batteries to your GARDENA dealer
or dispose of them properly at a public recycling centre.
1. Discharge lithium-ion cells completely.
2. Dispose of lithium-ion cells properly.
on handle.
F
again.
G
on handle.
C
again by hand.
5
backwards to
D
and turn to the
F
and then press Start
D
180 °
Cutting position
Park position
5
15