Gardena AccuCut 400 Li Betriebsanleitung - Seite 9
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Trimmer Gardena AccuCut 400 Li herunter. Gardena AccuCut 400 Li 10 Seiten. Turbotrimmer
Auch für Gardena AccuCut 400 Li: Betriebsanleitung (15 seiten), Betriebsanleitung (14 seiten)
Seite drucken
Replacing blades :
S
Fault
The Trimmer is not cutting
cleanly or not cutting at all
Charging indicator lamp does
not light up
Charging indicator lamp
flashes for more than
1 hour
The battery can no longer
be charged
In the event of other faults please contact GARDENA Service.
A
Repairs should only be carried out by GARDENA service centres or dealers
authorised by GARDENA.
9. Accessories
GARDENA Spare Blades
GARDENA Replacement Battery
GARDENA Additional wheel
Only use original GARDENA Spare Blades. Spare blades
are available from your GARDENA dealer or direct from
GARDENA Service.
• GARDENA Spare Blades for Turbotrimmer
AccuCut 400 Li / AccuCut 450 Li
Remove blade :
1. Turn Trimmer round and place on rubber pad of handle.
2. Press end of blade down slightly (A), slide blade
through blade carrier
T
Fit blade :
v Slide new blade
S
carrier
until it snaps into place.
When the new blade is correctly inserted, it can be moved
more easily.
Possible cause
Blade worn or too short.
Blade broken off.
Battery is flat.
Battery charger or charging cable v Plug in battery charger and
not plugged in properly.
A fault has occurred.
If this does not eliminate the fault, please contact
GARDENA Service.
Battery is defective.
Only the original GARDENA Replacement Battery 18 V
(Art. No. 8839) may be used. This can be obtained from your
GARDENA dealer or directly from GARDENA Service.
for AccuCut 400 Li
S
(B) and pull out.
T
from inside through slot in metal of blade
Remedy
v Replace blade.
v Replace blade.
v Charge battery.
charging cable properly.
v Unplug and reinsert
charging cable. The fault
will be reset.
v Replace the battery
(Art. No. 8839).
Art. No. 5368
Art. No. 8839
Art. No. 5310
Art. No. 5368
T
inside
19