Gardena EasyCut 400 Betriebsanleitung - Seite 3

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Trimmer Gardena EasyCut 400 herunter. Gardena EasyCut 400 10 Seiten. Gardena electric hedge trimmer operating instructions
Auch für Gardena EasyCut 400: Betriebsanleitung (10 seiten), Betriebsanleitung (14 seiten), Betriebsanleitung (10 seiten), Betriebsanleitung (10 seiten), Betriebsanleitung (7 seiten), Betriebsanleitung (15 seiten), (Französisch) Betriebsanleitung (8 seiten)

Seite drucken

Proper use / responsibility:

DANGER!

Take note that the rotating blade cylinder

could cause injuries.

v Never place your hands or feet on

or under moving parts.

Do not use the lawnmower while people,

especially children, or animals are nearby.

The operator is liable for damages.

The safety distance between the blade cylinder

and the operator that is created by the guiding

spar is to be always maintained.

When mowing embankments and slopes,

special care must be taken:

v Make sure you always keep a safe distance

and wear shoes with a nonslip sole.

Always cut diagonally to the slope.

3. Assembly

1. Insert lower upright holder

holder

2. Insert upper part of upright

holder

3. Insert both lower uprights

in lower upright holder

4. Insert threaded rod

through upright holder

5. Screw clamping nut

6. Insert both lower uprights

(pressing rods together slightly) until bolts

holder bearings

Tip:

Allow to engage first on one side, then on the other.

Take special care when moving backwards

and when pulling the lawn mower.

Danger of stumbling!

If the cutting tools or the lawnmower run into

an obstruction and / or solid objects, the lawn

mower should be properly and thoroughly

inspected.

v Only work when visibility is good.

Never leave the lawnmower unattended.

If your work is interrupted, store the mower

in a safe place.

Warning! Keep toddlers away when you assem-

ble the unit. Small parts can be easily swal-

lowed. There is also a risk that the polybag can

suffocate toddlers.

(already preassembled).

up to stop from underneath

on side with square hole right

onto threaded rod

into upright holders

engage.

into upper upright

up to stop in upper upright

in upright