Gardena EHT 410 Betriebsanleitung - Seite 4
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Trimmer Gardena EHT 410 herunter. Gardena EHT 410 9 Seiten. Tagliasiepi elettrica
Auch für Gardena EHT 410: (Italienisch) Betriebsanleitung (11 seiten)
Visibility
If you stop working
Familiarise yourself
with the surroundings
Never use in rain
or damp / wet areas
Electrical safety –
check for damage
Mains cable
Waterproof extension
cable socket
Extension cable
Using portable units
outdoors
For Switzerland
Never carry the Hedge
Trimmer by its cable
Initial Operation
12
Only work when visibility is good.
Never leave the Hedge Trimmer unattended in the working
place. If you stop work, store the Hedge Trimmer in a safe place.
Disconnect the mains plug!
Should you stop work in order to get to another working place,
always switch off the Hedge Trimmer to go there. Disconnect
the mains plug !
Always attach the blade protection for transport and storage of
the unit.
Make yourself familiar with the surroundings and look out for
dangers which you may not detect due to machinery noise.
Never use the unit when it rains or in damp / wet areas.
Do not operate the Hedge Trimmer near swimming pools and
garden ponds.
Check the power cable regularly for damage and signs of wear
and tear. The power cable must only be exchanged by an
authorised electrician. Please contact your GARDENA Service
Centre.
The Hedge Trimmer must only be operated with an undamaged
electrical cable. If the mains- or extension cable is damaged,
disconnect the mains plug immediately.
The socket of an extension cable should be waterproof.
Only use extension cables designed for outdoor use.
➔ Ask your electrician.
For portable units which are used outdoors, we recommend
to use a residual-current device having a residual-current rating
≤ 30 mA.
In Switzerland use of a residual-current device is obligatory.
Never carry the Hedge Trimmer by its cable. Never use the
cable to pull the connector plug out of the mains socket.
Protect the cable from heat, oil and sharp edges.
Cable lock / Extension Cable
Make part of the extension cable into a loop and clip into
the cable lock.
➔ prevents the cables being unplugged by accident.
Then:
Connect the mains and extension cables.