Gardena 1198 Betriebsanleitung - Seite 6

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Rasen- und Gartengeräte Gardena 1198 herunter. Gardena 1198 11 Seiten. Automatic water distributor
Auch für Gardena 1198: Betriebsanleitung (9 seiten)

Seite drucken

When using the GARDENA Water

Computer 1060 with "Special

program 11" resp. "Special

Pro gram", after activating this

function and entering all data for

the 1st programme, then all

following pro grammes will auto-

matically be pro grammed.

Through that, every programme

will be ordered to a definite water

outlet of the Auto matic Water

Distri butor without having to

individually define all 6 pro gram-

mes. The default settings (1 min

watering run time) can be altered

according to in dividual consumer

requirements.

In combination with the GARDENA

Water Computer 1030 or the

GARDENA Watertimer electronic,

7. Application in conjunction with the Moisture Sensor

The GARDENA Moisture Sensor,

art.no. 1187 can be used in

con nection with the Automatic

Water Distributor only when using

the Water Computer 1060 with

"Special Program" mode.

If the Moisture Sensor detects

sufficient moisture, it automatically

shortens the run time of the

watering pro gramme to the mini-

mum watering run time of

30 seconds (Display: 1 min).

In this way, the Automatic Distri -

8. Safety hints

Please make sure that

the programmes of the

Water Computer and the indivi-

dual water outlets of the Auto-

matic Water Distributor are

matched up according to your

requirements and that the

set watering days of all pro-

grammes are identical.

If the water tap is shut, the

Water Computer opens the

integrated valve at the chosen

times, but no water is produced!

the Automatic Water Distributor

switches 1 outlet further along

for each watering activity. Both

tools make it possible to activate

a maximum of 3 waterings per

day and in this limit the Automatic

Water Distributor can open up

to 3 outlets. The same outlet can

therefore be opened max. every

2 days.

If the location of the

Auto matic Water Distri -

butor is lower than all con -

nected watering devices the

maximum height difference

should not exceed 1.5 m.

If less than 6 water outlets are

used there is the option to operate

one or several water channel twice

a day. Please connect the outlets

butor switches to the next outlet.

Thus the correct ordering of the

individual watering programmes

to their respective outlets of the

Automatic Water Distributor is

retained.

When using the Water Computer

1060 without "Special Program",

the Water Computer 1030 or

the Watertimer electronic, pro-

grammes which have become

active will not operate when the

Moisture Sensor detects suffi-

The Automatic Water Distributor

can therefore not switch to the

next outlet. In this case the

ordering of the programmes is

no longer answer able to the

previously de signated outlets.

If the Water Computer

is operated manually

(On / Off) whilst connected to

the Automatic Water Distri butor,

the device will switch to the next

outlet. Therefore, do not operate

the Water Com puter manually.

as shown in ill. B and programme

the Water Com puter according

to your requirements.

The minimum water pressure for

proper operation is 1 bar. If too

many devices are connected to

one line, the pressure may fall

below 1 bar and will be insuffi-

cient for proper operation of all

devices.

The switch mechanism of your

Automatic Water Distributor is due

to technical reasons designed in

a way that during operation water

flows not only through the acti -

vated outlet, but also in small

quantities (some litres per hour)

through the other outlets.

cient moisture. In this case the

ordering of the programmes is

no longer answerable to the pre -

viously designated outlets of the

Automatic Water Distributor.

There is a risk of damage

if a desired programme

is no longer connected with its

respective water outlet – the

program may run using another

outlet of the Water Distributor.

If it is operated manually, please

ensure the programmes are

aligned afterwards to the water

outlets according to the original

setting.

To ensure correct function

of the unit, please leave a

time gap of 10 minutes between

the end of each pro gramme and

the start of the next. The time

gap between each programme

step in creases to 30 minutes

if you switch from a sealed un -

used outlet to the next outlet.