Gardena 1242 Betriebsanleitung - Seite 7

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Rasen- und Gartengeräte Gardena 1242 herunter. Gardena 1242 15 Seiten. Programming unit
Auch für Gardena 1242: Betriebsanleitung (15 seiten), Betriebsanleitung (15 seiten)

Seite drucken

7. (a)

7. (b)

Changing an existing

watering programme :

Ending the programming

mode early :

Reset :

7. (a) Watering cycle every 2nd or 3rd day :

Set the arrow ê to 2nd or 3rd using the ▲-▼ keys

(for example 3rd = every 3rd day) and confirm by pressing

the Ok key.

The watering programme is saved. The watering cycle

(for example 3rd ) and the preview for the week (for example

Mo, Th, Su ) are displayed for 2 seconds. The display then

returns to point 1 and the next programme flashes.

The days in the preview for the week always depend on

the current day of the week.

– or –

(b) Watering cycle for any day of the week :

Set the arrow ê to the correct day (for example Mo = Monday)

using the ▲-▼ keys and activate or deactivate each day by

pressing the Ok key.

Once you have activated all the days on which you require

watering (for example Mo, We, Fr), press the ▲ key repeatedly

until the arrow ê over Su disappears.

The watering programme is saved. The watering cycle

(for example Mo, We, Fr ) is displayed for 2 seconds.

The display then returns to point 1 and the next programme

flashes.

If a watering programme already exists for one of the 6 pro-

grammes, you can change the data for this programme without

having to re-enter the entire programme.

The values for the watering start time, watering time, and water-

ing cycle already exist. You therefore only have to change the

specific data you wish to change. All other values can be accepted

in the "Creating Watering Programme" mode by simply pressing

the Ok key.

You can exit the programming mode prematurely at any time.

v Press the Menu key. The main level (time and day) is displayed.

The Programming Unit is reset to the basic state and all

programme data is deleted.

v Press the ▲ key and the Ok key simultaneously and hold down

for 2 seconds.

• All symbols on the display are shown for 2 seconds.

• The programme data for all programmes is deleted.

• The manual running time is set to 30 minutes (

• The system time and day are not deleted.

You can reset the Programming Unit by pressing the ▲ key and

the Ok key from all programming levels. The display then shows

the main level.

0 : 30