Makita XWT09XV Gebrauchsanweisung - Seite 8
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Elektrowerkzeug Makita XWT09XV herunter. Makita XWT09XV 12 Seiten.
Auch für Makita XWT09XV: Gebrauchsanweisung (12 seiten)
Seite drucken
Impact force/bolt size corresponding chart (reference)
Impact force grade displayed on
panel
Hard
Medium
Soft
ASSEMBLY
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before carrying out any work on the tool.
Selecting correct impact socket
Always use the correct size impact socket for bolts and
nuts. An incorrect size impact socket will result in inac-
curate and inconsistent fastening torque and/or damage
to the bolt or nut.
Installing or removing impact socket
Only for Model XWT07, XWT08, XWT07XV, XWT08XV
(optional accessory)
CAUTION:
Make sure that the impact socket
and the mounting portion are not damaged before
installing the impact socket.
For impact socket without O-ring
and pin
1
2
► 1. Impact socket 2. Square drive
XWT07 / XWT07XV
Standard bolt
High tensile
bolt
M20 - M30
M16 - M24
(3/4" - 1-1/4")
(5/8" - 1")
M16 - M24
M12 - M20
(5/8" - 1")
(1/2" - 3/4")
M12 - M20
M10 - M16
(1/2" - 3/4")
(3/8" - 5/8")
8 ENGLISH
XWT08 / XWT08XV
Standard bolt
High tensile
bolt
M20 - M30
M16 - M24
(3/4" - 1-1/4")
(5/8" - 1")
M16 - M24
M12 - M20
(5/8" - 1")
(1/2" - 3/4")
M12 - M20
M10 - M16
(1/2" - 3/4")
(3/8" - 5/8")
Align the square of the impact socket with the square
drive and push the impact socket onto the square drive
until it locks into place. Tap it lightly if required.
To remove the impact socket, simply pull it off.
For impact socket with O-ring
and pin
Only for Model XWT07, XWT07XV
1
2
► 1. Impact socket 2. O-ring 3. Pin
Move the O-ring out of the groove in the impact socket
and remove the pin from the impact socket. Fit the
impact socket onto the square drive so that the hole in
the impact socket is aligned with the hole in the square
drive.
Insert the pin through the hole in the impact socket and
square drive. Then return the O-ring to the original posi-
tion in the impact socket groove to retain the pin.
To remove the impact socket, follow the installation
procedures in reverse.
XWT09 / XWT09XV
Standard bolt
High tensile
bolt
M20 - M24
M16 - M22
(3/4" - 1")
(5/8" - 7/8")
M14 - M20
M10 - M16
(9/16" - 3/4")
(3/8" - 5/8")
M12 - M16
M10 - M12
(1/2" - 5/8")
(3/8" - 1/2")
3