Gardena 9335-20 Betriebsanleitung - Seite 3
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Gebläse Gardena 9335-20 herunter. Gardena 9335-20 16 Seiten. Accu blower
Auch für Gardena 9335-20: Benutzerhandbuch (10 seiten), Betriebsanleitung (18 seiten), Betriebsanleitung (17 seiten), Betriebsanleitung (17 seiten)
Seite drucken
General Power Tool Safety Warnings
WARNING
warnings and all instructions.
Failure to follow the warnings and
instructions may result in electric
shock, fire and/or serious injury.
Save all warning and instructions for future
reference.
The term "power tool" in the warnings refers to
your battery operated (cordless) power tool.
1) Work area safety
a) This product is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or instruc
tion concerning the use of the product by a
person responsible for their safety. Children
should be supervised to ensure that they do
not play with the product. Local regulations
may restrict the age of the operator. Never
allow children or people unfamiliar with these
instructions to use the product. Power tools
are dangerous in the hands of untrained users.
b) Never operate the product while people,
especially children, or pets are nearby.
Distractions can cause you to lose control.
c) Never blow debris in the direction of
bystanders. The operator or user is responsible
for accidents or hazards occurring to other
people or their property.
d) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
e) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the charger plug in any way.
Do not use any adaptor plugs with earthed
(grounded) power tools. Use only on AC
mains supply voltage shown on the product
rating label. Unmodified plugs and matching
outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or
grounded surfaces, such as pipes, radiators,
ranges and refrigerators.
There is an increased risk of electric shock if
your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk electric shock.
: Read all safety
d) Do not abuse the charger or charger cord.
Never use the charger cord for carrying, pull
ing or unplugging the charger. Keep charger
and charger cord away from heat, oil, sharp
edges or moving parts. Before use, examine
for damage. Replace charger and/or charger
cord if there are signs of damage or aging.
Do not use the product if the charger or char
ger cord is damaged or worn. Immediately
disconnect from the mains electricity supply
if the cord is cut, or the insulation is dam
aged. Do not touch the electric cord until the
electrical supply has been disconnected.
Do not repair a cut or damaged cord. Replace
it with a new one. Damaged or entangled cords
increase the risk of electric shock.
e) The electric cord must be uncoiled.
Coiled cord can overheat and reduce the
efficiency of the product. Always wind cord
carefully, avoiding kinks.
f) Only use the charger provided with your
unit when charging the battery. Use of any
other charger could permanently damage the
battery, charger and/or the blower unit.
g) If operating a power tool in a damp loca
tion is unavoidable, use a residual current
device (RCD) protected supply with a tripping
current of not more than 30 mA. Even with
a RCD installed, 100 % safety cannot be
guaranteed and safe working practices must
be followed at all times. Check your RCD
every time you use your product. Use of an
RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a power
tool. Do not use a power tool while you are
tired or under the influence of drugs, alcohol
or medication.
A moment of inattention while operating power
tools may result in serious personal injury.
b) Use personal protective equipment.
Always wear eye protection and hearing
protection. To prevent dust irritation,
the use of a dust mask is recommended.
Protective equipment such as eye protection,
hearing protection, dust mask, nonskid safety
shoes, or hard hat used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Battery
powered units do not have to be plugged into
an electrical outlet to operate; therefore, they
are always in operating mode. Ensure the
switch is in the off position before connecting
15