Makita 6300LR Gebrauchsanweisung - Seite 5

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Bohrer Makita 6300LR herunter. Makita 6300LR 13 Seiten. Makita angle drill instruction manual
Auch für Makita 6300LR: Gebrauchsanweisung (8 seiten)

Seite drucken

FUNCTIONAL

DESCRIPTION

1. Counterclockwise

2. Switch trigger

3. Clockwise

ASSEMBLY

1. Reference markings

1. Chuck key

2. Wrench

CAUTION:

•

Always be sure that the tool is switched off and

unplugged before adjusting or checking function on the

tool.

Switch action

003012

CAUTION:

•

Before plugging in the tool, always check to see that the

switch trigger actuates properly and returns to the "OFF"

position when released.

•

Change the direction of rotation only when the tool

comes to a complete stop. Changing it before the tool

stops may damage the tool.

The switch is reversible, providing either clockwise or coun-

terclockwise rotation. To start the tool, simply pull the lower

part of the switch trigger for clockwise or the upper part for

counterclockwise. Release the switch trigger to stop.

CAUTION:

•

Always be sure that the tool is switched off and

unplugged before carrying out any work on the tool.

Installing or removing angle attachment

003062

The angle head has a spindle on each end. For higher speed

operation, attach the drill chuck to the end marked "HIGH".

The higher speed is better suited for drilling smaller diameter

holes.

For lower speed operation, attach the drill chuck to the end

marked "LOW". The lower speed is best utilized for drilling

larger diameter holes.

When you wish to attach the drill chuck to the opposite end

003063

to change the speed, proceed as follows.

First, open the chuck jaws completely and then remove the

screw through the chuck opening by turning it clockwise (left

hand threaded screw) with the hex wrench. Grip the hex end

of the spindle with the wrench and place the chuck key in one

of the key holes. Hammer the chuck key lightly in the direc-

tion of the arrow (counterclockwise) until the drill chuck can

be removed. If you use a special wrench set (optional acces-

sory), you can remove the drill chuck easily.