Gardena AccuJet Li-18 Betriebsanleitung - Seite 8

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Gebläse Gardena AccuJet Li-18 herunter. Gardena AccuJet Li-18 16 Seiten. Accu blower
Auch für Gardena AccuJet Li-18: Betriebsanleitung (16 seiten), Benutzerhandbuch (10 seiten), Betriebsanleitung (18 seiten), Betriebsanleitung (17 seiten), Betriebsanleitung (17 seiten)

Gardena AccuJet Li-18 Betriebsanleitung
Working positions:

5. Storage

To put into storage:
Overwintering:
Disposal:
(in accordance with
RL 2012/19/EU)
20
Use your unit as a blower for sweeping debris or grass clippings
from driveways, sidewalks, patios, etc. Also, for blowing grass
clippings, straw, or leaves into piles, or removing debris from
corners, around joints, or between bricks.
Direct air flow by directing the blower tube down or to one side.
Always work away from solid objects such as walks, large stones,
vehicles, and fences.
Clean corners by starting in corners and moving outward. This will
help prevent an accumulation of debris which could fly into your
face. Be careful when working near plants. The force of the air
could damage tender plants.
Store unit with battery removed, well out of the reach of
children.
1. Stop unit and remove battery (see 3. Initial Operation).
2. Charge battery; this will increase the life of the battery.
3. Allow motor to cool before storing or transporting.
4. Store unit with all guards in place. Position unit so that any
sharp object cannot accidentally cause injury.
Prepare unit for storage at the end of the season or if it will not
be used for 30 days or more.
If your blower is to be stored for a period of time:
1. Stop unit and remove battery (see 3. Initial Operation).
2. Charge battery; this will increase the life of the battery.
3. Clean the entire unit before lengthy storage.
4. Use a soft brush to clean air vents and air inlet of debris.
Do not use water.
5. Store your unit in a well ventilated area and covered,
if possible, to prevent dust and dirt accumulation.
Do not cover with plastic. Plastic cannot breathe and
may cause condensation and eventual rust or corrosion.
6. Check entire unit for loose screws.
Replace any damaged, worn, or broken parts.
7. Remove blower tube for easier storage.
The product must not be added to normal household waste.
It must be disposed of in line with local environmental regulations.
v Important: Make sure that the unit is disposed of via your
municipal recycling collection centre.