HIKVISION DS-KD-M Schnellstart-Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Intercom System HIKVISION DS-KD-M herunter. HIKVISION DS-KD-M 5 Seiten. Configuring display module

Seite drucken

QSG Configuring a DS-KD-DIS Display Module

Configuring a Hikvision Video Intercom DS-KD-DIS Display Module

    Preparation− − − − The following items are required for configuration:

Display Module (DS-KD-DIS, v1.0.0_190520)

•

Main Unit (DS-KD-8003-IME1, v2.0.6_190808 above)

•

Sub Module (DS-KD-KP/DS-KD-M/ DS-KD-KK, v1.0.0_190522)

•

Client Software iVMS-4200 (v3.1.11 and above)

•

If the keyboard module is not connected, the display module directly enters the

NOTES:

address book interface; if the keyboard module is connected, the display module will

show the main interface. Press the Up (∧ ∧ ∧ ∧ ) and Down (∨ ∨ ∨ ∨ ) arrow keys to enter the

address book interface.

The maximum number of modules is eight, or a maximum of five if the display module

is included. The maximum number of sub-modules is as follows:

It is recommended to upgrade the other sub-modules' firmware before upgrading the

display module firmware.

Make sure all related devices are powered off during wiring.

    Wiring

1. Configure the sub module DIP switches. Each sub-module's DIP switch address should be unique

for connecting to the main unit. The sub module DIP switches and corresponding DIP switch status

are displayed below (DIP switches 1, 2, 3, and 4 are used to code the sub module address; valid sub

module addresses are from 1 to 8).

QSG How To Configure a DS-KD-DIS Display Module 112719NA

Maximum Nametag Modules: 8

Maximum Keyboard Modules: 1

Maximum Card Modules: 5

Maximum Display Modules: 1