A&L Furniture VersaLoft ALF187 Montageanleitung

Blättern Sie online oder laden Sie pdf Montageanleitung für Inneneinrichtung A&L Furniture VersaLoft ALF187 herunter. A&L Furniture VersaLoft ALF187 1 Seiten. Twin over full bunkbed

Seite drucken
Tools Needed:
-Square Drive Bit
-Power Screw Driver
Step 1:
Attach legs to headboards using 8 - 4" bolts per bed. Tighten with the Allen Wrench. Fasten ends
of Headboard caps to top of legs with 4 - 1
Step 2:
Insert dowel nuts into holes on inside of side rails. Attach the headboards to the side rails with the
2
/
" bolts, turning bolts into dowel nuts with the Allen wrench. (Do not overtighten).
3
4
Step 3:
Fasten long safety rail to one side of the twin bed. Make sure the end braces are even with the
bottom of the side rails. Take 8 - 1
to side rail. (See Figure 3). Fasten the 2 middle braces with 4 - 1
safety rail on the other side in the same manner.
Step 4:
Lay the slat rolls in the bed frames with the slat string facing up.
" screws. (See Figure 2).
Attach with the 1
/
1
2
Step 5:
Insert the metal dowels in the holes in the headboard caps of the bottom bed. Put
the wooden caps in the holes in the headboard caps of the full bed. (The twin bed can be on
either side of the full bed, just put the metal dowels in the correct holes. Put the wooden caps
in the 4 remaining holes of the full bed and also in the holes in the headboard cap of the twin bed.
Step 6:
Now put the twin bed on top of the full bed, inserting the metal dowels in the bottom of the legs on
the twin bed.
Step 7:
Hook the end of the ladder with metal brackets over the side rail of the top bed. Fasten the brackets
to the inside of the side rail with two 1" screws. Now attach the bottom of the ladder with the two 2 1/2" screws
in the predrilled holes.
Assembly Instructions:
Twin over Full Bunkbed
Parts List:
4 - Headboards
4 - Side Rails
1 - Long Safety Rail
1 - Short Safety Rail
8 - Legs
2 - Slat Rolls
1 - Ladder
8 - Wooden Caps
" screws per bed. Insert in small predrilled holes (See Figure 1).
/
1
2
/
" screws and insert in predrilled holes in end braces to fasten safety rail
3
4
Beds need a standard Twin or Full mattress.
Figure 1
/
" screws. Fasten the short
1
2
Hardware List:
1 - Allen Wrench
16 - 4" Bolts
16 - 2
/
" Bolts
3
4
16 - Dowel Nuts
2 - 2
/
" Screws
1
2
16 - 1
/
" Screws
3
4
66 - 1
/
" Screws
1
2
2 - 1" Screws
4 - Metal Dowels
Figure 2
Slat
Figure 3