A&L Furniture Ridgemont Montageanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Montageanleitung für Outdoor-Einrichtung A&L Furniture Ridgemont herunter. A&L Furniture Ridgemont 2 Seiten. Table set

Seite drucken

PARTS

(included)

Table Top (1)

Table Legs (2)

Bench Legs (4)

Bench Tops (2)

STEP 1

Lay the table top upside down on a clean flat surface and place the legs on the metal plate on the table top.

(See photo 1.) Fasten the legs to the plates with the ¼" x ½" bolts. (See photo 2.) Use the Allen wrench to

tighten them.

STEP 2

Adjust the levelers in each leg (see photo 3) to stabilize the table so it doesn't rock or wobble. (You should

be able to turn these with your fingers but if they are a little tight you may have to use pliers.)

STEP 3

For the benches repeat steps 1 & 2 and attach the legs to the benches using the same procedure as for

the table except only 4 bolts are needed for each leg instead of 6. The levelers can be adjusted the same

way.

Photo 1

Photo 3

HARDWARE

(included)

¼" x ½" Bolt (28)

Allen Wrench (1)

TOOLS NEEDED

None

Photo 2