A&L Furniture Wingate Swingbed Montageanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Montageanleitung für Baby-Schaukel A&L Furniture Wingate Swingbed herunter. A&L Furniture Wingate Swingbed 3 Seiten.

Seite drucken
PARTS
(included)
Swingbed Seat (1)
Swingbed Back (1)
Left Arm (1)
Right Arm (1)
TOOLS NEEDED
Hammer for Light Tapping
½" Wrench or Socket
Screw Gun
STEP 1
Attach the back to the seat using 2" bolts as shown. (See photos 1 & 2.) Screw a flange nut on to each bolt.
(See photo 3.) Tighten with the ½" wrench or socket (may have to tap the bolt heads to adjust them
properly).
B
A
photo 1
STEP 2
Attach the arms using two 3¼" bolts in the rear of the arm and 6" bolt in the front. (See photo 4.) Use 2"
screws to fasten the slats. (See photo 5.)
b
b
a
photo 4
HARDWARE
5
/
" x 6" Bolt (2)
a
16
5
/
" x 3¼" Bolt (4)
b
16
5
/
" x 2" Bolt (4)
c
16
Flange Nut (14)
d
Eye Bolt (4)
e
2" Wood Screw (14)
f
Square Drive Bit (1)
g
Chain or Rope (4)
h
c
c
photo 2
f
(included)
d
d
photo 5
photo 3