A&S Mini Studio Bar 110 Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Lautsprechersystem A&S Mini Studio Bar 110 herunter. A&S Mini Studio Bar 110 14 Seiten.

Seite drucken

1. Connect to a Bluetooth Device

General Operation

Standby/ON

When you first connect the main unit to the mains socket, the main unit will be in Standby mode.

Press the

button on the unit or on the remote control to switch the unit ON.

Press the

button again on the remote control or on the unit to switch the unit back to STANDBY

mode. The POWER indicator will light up red.

Disconnect the mains plug from the mains socket if you want to switch the unit OFF completely.

If a TV or an external device (Only for AUX socket) is connected, the main unit will switch on

automatically when the TV or the external device is switched on.

When the unit has no input signal for over 15 minutes, it will automatically switch to Standby mode.

Select Modes

Press the SOURCE button repeatedly on the unit or the AUX, BT, OPTICAL, COAXIAL, HDMI ARC

button on the remote control to select the desired mode.

Indicator

Red

Standby

Mode

Adjust the Volume

Press the VOL+ / VOL- buttons on the unit or on the remote control to adjust the volume.

While adjusting the volume, the status indicator flashes quickly.

While the volume level reaches its maximum level, if you press the VOL+ button again, the status

indicator flashes once. While the volume level reaches its minimum level, if you press the VOL-

button again, the status indicator flashes once.

Mute Sound

If you wish to turn the sound off, press the MUTE button on the remote control. Press the MUTE

button again or press the VOL+ / VOL- buttons on the unit or on the remote control to resume

normal listening.

Select Equaliser (EQ) Effect

While playing, press the EQ button on the unit or on the remote control to select desired preset

•

equalisers: Movie (recommended for viewing movies), Music (recommended for listening to music),

NEWS (recommended for listening to NEWS).

- NEWS: Green light flash / - Movie: Orange light flash / - Music: Blue light flash

Play for External Audio Devices

Ensure that the unit is connected to the TV or audio device.

1 While in ON mode, press the SOURCE button repeatedly on the unit or the AUX, OPTICAL,

COAXIAL HDMI ARC button on the remote control to select the desired mode.

2 Operate your audio device directly for playback features.

3 Press the VOL +/– buttons to adjust the volume to your desired level.

Tip: While in OPTICAL/COAXIAL/HDMI ARC mode, if there's no sound output from the unit and the

OPTICAL/COAXIAL/HDMI ARC Indicator flashes, you may need to activate PCM Signal output on your

source device (eg. TV, DVD or Blu-ray player).

Green

Blue

AUX

White

HDMI ARC

Orange / Orange flash

OPTICAL / COAXIAL