A&S Studio Bar 200 Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Lautsprechersystem A&S Studio Bar 200 herunter. A&S Studio Bar 200 16 Seiten. 2.1 bar with built-in subwoofer 200

Seite drucken

Remote Control

Switch the unit between ON and STANDBY

mode.

2 SOURCE buttons

Select the play function.

3 MUTE

Mute or resume the sound.

4 VOL+/VOL-

Increase/decrease the volume level.

•

In Bluetooth mode, skip to previous/next

audio file.

•

/ PAIR

In Bluetooth mode, start or pause playback.

Press and hold to activate the pairing

function in Bluetooth mode and disconnect

the existing paired Bluetooth device.

5 DIMMER

Adjust display brightness.

6 EQ buttons

Select equaliser (EQ) effect

Preparations

Prepare the Remote Control

The provided Remote Control allows the unit to be operated from a distance.

Even if the Remote Control is operated within the effective range (6m), remote control operation

•

may be impossible if there are any obstacles between the unit and the remote control.

If the Remote Control is operated near other products which generate infrared rays, or if other

•

remote control devices using infra-red rays are used near the unit, it may operate incorrectly.

Conversely, the other products may operate incorrectly.

First-time use:

The unit has a pre-installed lithium CR2025 battery. Remove the protective tab to

activate the remote control battery.

Replace the Remote Control Battery

1 Pull out the battery tray and remove the old battery.

2 Place a new CR2025 battery into the battery tray

with correct polarity (+/-) as indicated.

3 Insert the battery tray back into the slot.

Precautions Concerning Batteries

When the Remote Control is not to be used for

a long time (more than a month), remove the

battery from the Remote Control to prevent it from leaking.

If the batteries leak, wipe away the leakage inside the battery compartment and replace the

batteries with new ones.