Align-Pilates A2 Montageanleitung Handbuch - Seite 8

Blättern Sie online oder laden Sie pdf Montageanleitung Handbuch für Fitnessgeräte Align-Pilates A2 herunter. Align-Pilates A2 16 Seiten. Full cadillac

Seite drucken

Now that the brackets are in place you can insert the upright poles. Please ensure the grub screws on the

brackets have all been released to allow the poles to slide in easly. At the head end the two poles with the

holes along their length are inserted with the holes at the top and facing outward away from the reformer.

At the foot end the poles can be inserted with the holes at the top as shown in Figs.7 & 8.

Fig.7

Fig.8

Now you can attach the carriage brackets on to the head end poles with one pair of normal brackets

going on first, slide these to the bottom, Fig.9. Then slide the two push through bar carriages onto the

poles and lock into place (Fig.9) and then finally the third pair of carriage brackets as in the picture below

Fig.9.

Fig.9

Fig.10

At the foot end of the reformer you can now slide over the roll down bar frame. It is held in place by two

knobs which you screw in to each side of the frame in the holes provided.

The 'halo' or top frame of the Cadillac will arrive already built with the trapeze frame already attached.

Lower the Halo onto the top of each of the poles corners and then use the eyelets to secure into place

using the tools provided, see Fig.10. Once all four corners are attached the result should be as Figs 11.

Fig.10

Fig.11