Garmin 010-10986-00 - MapSource City Navigator NT Benutzerhandbuch - Seite 19

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für GPS Garmin 010-10986-00 - MapSource City Navigator NT herunter. Garmin 010-10986-00 - MapSource City Navigator NT 30 Seiten. Software de mapeamento
Auch für Garmin 010-10986-00 - MapSource City Navigator NT: Benutzerhandbuch (24 seiten), Benutzerhandbuch (2 seiten), Benutzerhandbuch (15 seiten), Benutzerhandbuch (28 seiten), (Portugiesisch) Benutzerhandbuch (30 seiten)

Seite drucken
Garmin 010-10986-00 - MapSource City Navigator NT Benutzerhandbuch

Receiving Data from Your GPS Unit

If your GPS unit has a storage card, verify that the card
is inserted correctly into the unit. Also, connect your
GPS unit or card reader to your computer and set your
unit's Data Transfer mode to Garmin, if applicable
(see your unit owner's manual for instructions).
You can receive waypoints, routes, and tracks from
your GPS unit.
To receive data from a GPS unit or card
reader:
1. If you are using an iQue, synchronize with your
personal computer, if necessary, so that you
can send information to MapSource.
2.
Click Receive From
Transfer > Receive From
of your GPS unit or card reader should appear
automatically in the Device menu. If not, click
Find
Device.
MapSource User's Manual
Device
, or click
Device. The name
u
M
s
>
t
sIng
ap
ource
ransferrIng
• If you are using a USB card programmer,
"USB Data Card Programmer" appears in
the Device field.
• If you are using a CF or SD card reader,
select the correct drive letter from
the Device field. For example, select
"Removable Disk (E:)."
• If you are using an iQue, select the correct
user name from the Device field.
3. Under What to Receive, check the boxes next
to each type of data you want to receive.
4. Click Receive. MapSource begins receiving
data from your GPS unit or card reader. The
data appears in the corresponding data tabs on
the left side of the window.
M
s
d
ap
ource
ata