AEG 7000 Series Benutzerhandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Backofen AEG 7000 Series herunter. AEG 7000 Series 44 Seiten.
Auch für AEG 7000 Series: Benutzerhandbuch (32 seiten), Benutzerhandbuch (49 seiten), Benutzerhandbuch (32 seiten), Benutzerhandbuch (28 seiten), Benutzerhandbuch (36 seiten)

Seite drucken

6. DIAL AND BUTTONS

6.1 Introduction

When pressing a key

combination, do not tilt

your fingers downwards .

The sensors of the

underneath buttons are

sensitive and may interfere

with Your choice.

6.2 On/Off

Pressing this button for a few seconds

allows to activate or deactivate the

appliance. Two different tunes sound

while switching the appliance on or off.

As the Stand-by function automatically

deactivates the appliance to decrease

the energy consumption in a few cases,

you may need to activate the appliance

again.

For more details, refer to Stand-by

paragraph in Daily Use chapter.

6.3 Introduction

The options/functions are

not selectable with all

washing programmes. Check

the compatibility between

options/functions and

washing programmes in the

"Programme Chart". An

option/function can exclude

another one, in this case the

appliance doesn't allow you

to set the incompatible

options/functions together.

Make sure the screen and

touch buttons are always

clean and dry.

6.4 Temp.

When you select a washing programme,

the appliance automatically proposes a

default temperature.

Touch this button repeatedly until the

desired temperature value appears on

the display.

When the display shows the indicators

and

, the appliance does not

heat the water.

6.5 Spin

When you set a programme, the

appliance automatically sets the

maximum spin speed allowed.

Touch repeatedly this button to:

• Decrease the spin speed.

The display shows only

the spin speeds available

for the set programme.

• Activate the No Spin option

This option is available only with the

Spin/Drain programme. The

appliance skips all spin phases and

only drains the water. The display

shows the indicator

6.6 Stains/Prewash

Press this button repeatedly to activate

one of the two options.

The relevant indicator goes on in the

display.

• Stains

Select this option to add an anti-stain

phase to a programme in order to

treat heavily soiled or stained laundry

with stain remover.

Pour the stain remover into

compartment

will be added in the appropriate

phase of the washing programme.

This option is not

available with a

temperature lower than

40 °C.

• Prewash

Use this option to add a pre-wash

phase at 30 °C before the washing

phase.

This option is recommended for

heavily soiled laundry, especially if

containing sand, dust , mud and other

solid particles.

ENGLISH

. The stain remover