AEG BES331110M Benutzerhandbuch - Seite 27

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Backofen AEG BES331110M herunter. AEG BES331110M 32 Seiten.
Auch für AEG BES331110M: Benutzerhandbuch (32 seiten)

Seite drucken

11.6 Replacing the lamp

WARNING!

Risk of electric shock.

The lamp can be hot.

1. Turn off the oven.

Wait until the oven is cooled down.

2. Disconnect the oven from the mains.

3. Put a cloth on the bottom of the

cavity.

The top lamp

1. Turn the lamp glass cover to remove

it.

12. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

12.1 What to do if...

Problem

You cannot activate or oper-

ate the oven. The display

shows "400" and an acoustic

signal sounds.

The oven does not heat up.

The lamp does not operate.

Steam and condensation

settle on the food and in the

cavity of the oven.

12.2 Service data

If you cannot find a solution to the

problem yourself, contact your dealer or

an Authorised Service Centre.

2. Clean the glass cover.

3. Replace the lamp with a suitable 300

°C heat-resistant lamp.

4. Install the glass cover.

Possible cause

The oven is incorrectly con-

nected to an electrical sup-

ply.

The oven is deactivated.

The clock is not set.

The necessary settings are

not set.

The fuse is blown.

The lamp is defective.

You left the dish in the oven

for too long.

The necessary data for the service centre

is on the rating plate. The rating plate is

on the front frame of the oven cavity. Do

not remove the rating plate from the

oven cavity.

ENGLISH

Remedy

Check if the oven is correctly

connected to the electrical

supply (refer to the connec-

tion diagram if available).

Activate the oven.

Set the clock.

Make sure that the settings

are correct.

Make sure that the fuse is

the cause of the malfunction.

If the fuse is blown again

and again, contact a quali-

fied electrician.

Replace the lamp.

Do not leave the dishes in

the oven for longer than 15 -

20 minutes after the cooking

process ends.