Alinco DR-MD500 Gebrauchsanweisung - Seite 3

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Radio Alinco DR-MD500 herunter. Alinco DR-MD500 20 Seiten. Vhf/uhf dual band digital transceiver

Seite drucken

Introduction

■

Please read this manual completely from the first page to the last, to

learn all the functions the product offers. It is important to note that some

of the operations may be explained in relation to information in previous

chapters. By reading just one part of the manual, you may risk not

understanding the complete explanation of the function.

Safety

■

It is important that the operator is aware of, and understands, hazards

common to the operation of any transceiver.

Before transmitting

There are many radio stations operating in proximity to the frequency

ranges this product covers. Be careful not to cause interference when

transmitting around such radio stations.

Covering ranges

■

It may vary drastically depending on the type and location of antenna

system. Please consult your dealer for details as DR-MD500 requires an

external antenna.

Lightning

■

Any person is not safe outdoors during thunderstorms and lightning. Note

also that no car provides adequate protection of its passengers or drivers

against lightning as well. Therefore, Alinco will not take responsibility

for any danger associated with using radios outdoors or inside the car

during lightning.

Enclosure protection

■

This transceiver is NOT water and dust protected. Avoid contacts with

water and dust, and if wet or dirty, immediately wipe them out with clean

dry cloth. This product is NOT anti-explosive.

Never use in close vicinity to explosive gas, combustible dust,on an oil

rig or in an open mine.

For North American users

■

Due to strict rules, this product is blocked for operations before sales

and only dealers can program the radio before delivery to consumers.

Manufacturer is not aware of details of such dealer-programming

therefore please kindly contact your dealer first in case technical-service

may be necessary.

Important Notice

■

The utility software may be available to distributors/dealers only.

Programming cable is optional. The manufacturer will not release

the software to unauthorized party so please contact your dealer for

details. This product may be delivered to the consumer after being

preprogrammed with the operating parameters, then certain operation

may be disabled for user-accesses. The manufacturer and distributers

are not aware of details of such dealer-programming. Therefore,

please contact to your dealer in case any technical assistance may be

necessary.