Garmin Zumo 590 Benutzerhandbuch - Seite 22
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für GPS Garmin Zumo 590 herunter. Garmin Zumo 590 26 Seiten. Zumo 590
Auch für Garmin Zumo 590: Schnellstart-Handbuch (6 seiten), Benutzerhandbuch (26 seiten), Installationsanleitung Handbuch (36 seiten), Installationsanleitung Handbuch (46 seiten)
Seite drucken
vehicle power cable does not work unless it is assembled
correctly.
If your device does not charge in your vehicle, you may need to
replace the fuse located at the tip of the vehicle adapter.
1
Unscrew the end piece
2
Remove the end piece, the silver tip
3
Insert a new 3 A fast-blow fuse.
4
Place the silver tip in the end piece.
5
Screw the end piece back into the vehicle power cable
Mounting on Your Dashboard
The permanent mounting adhesive is extremely difficult to
remove after it is installed.
You can use an optional mounting disk to mount your device to
the dashboard and comply with certain state regulations. See
www.garmin.com
for more information.
1
Clean and dry the dashboard where you are placing the disk.
2
Remove the backing from the adhesive on the bottom of the
disk.
3
Place the disk on the dashboard.
4
Remove the clear plastic cover from the top of the disk.
5
Place the suction cup mount on top of the disk.
6
Flip the lever down (toward the disk).
Removing the Device, Mount, and Suction
Cup
Removing the Device from the Mount
1
Press the release tab or button on the mount.
2
Tilt the device forward.
Removing the Mount from the Suction Cup
1
Turn the device mount to the right or left.
2
Apply pressure until the socket on the mount releases the
ball on the suction cup.
Removing the Suction Cup from the Windshield
1
Flip the lever on the suction cup toward you.
2
Pull the tab on the suction cup toward you.
Purchasing Additional Maps
1
Go to your device product page at (www.garmin.com).
2
Click the Maps tab.
3
Follow the on-screen instructions.
Safety Cameras
Garmin is not responsible for the accuracy of or the
consequences of using a custom point of interest or a safety
camera database.
Information about safety camera locations and speed limits is
available in some areas. Go to
to check availability or to purchase a subscription or one-time
18
.
, and the fuse
NOTICE
NOTICE
www.garmin.com/safetycameras
update. You can purchase a new region or extend an existing
subscription at any time.
You can update safety cameras for an existing safety camera
subscription by going to http://my.garmin.com. You should
update your device frequently to receive the most up-to-date
safety camera information.
For some devices and regions, basic safety camera data may
be included with your device. Included data does not include
updates or a subscription.
Custom Points of Interest
Custom POIs are customized points on the map. They can
.
contain alerts that let you know if you are near a designated
point or if you are traveling faster than a specified speed.
Installing POI Loader
.
You can create or download custom POI lists on your computer
and install them on your device using POI Loader software.
1
Go to www.garmin.com/poiloader.
2
Follow the on-screen instructions.
Using the POI Loader Help Files
For more information on the POI loader, refer to the Help file.
With the POI loader open, click Help.
Finding Custom POIs
Before you can find custom POIs, you must load custom POIs
on your device using the POI Loader software
Loader).
1
Select Where To? > Categories.
2
Scroll to the Other Categories section, and select a category.
Purchasing Accessories
Go to http://buy.garmin.com.
Specifications
Water resistance
Operating temperature
range
Charging temperature
range
Power input (CLA,
motorcycle, or external
power)
Power input (USB)
Battery life
Battery type
Battery voltage range
Radio frequency protocol
My device is not acquiring satellite signals
• Verify the GPS simulator is turned off
• Take your device out of parking garages and away from tall
buildings and trees.
• Remain stationary for several minutes.
Device Information
IEC 60529 IPX7
-4° to 131°F (-20° to 55°C)
32° to 113°F (0° to 45°C)
8–28 Vdc
5 V ±0.25 V
Up to 4 hours, depending on usage and
settings
User-replaceable lithium-ion battery
3.5 V–4.1 V
2.4 GHz ANT+™ wireless communications
protocol (for VIRB Remote)
2.4 GHz ANT™ (for Tire Pressure Monitor
System)
Troubleshooting
(Navigation
(Installing POI
Settings).
Device Information