Garmin Fenix 5x Benutzerhandbuch - Seite 34
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Siehe Garmin Fenix 5x herunter. Garmin Fenix 5x 49 Seiten.
Seite drucken
5 Select Auto Lap > Lap Alert.
6 Select a data field to change it.
7 Select Preview (optional).
Enabling Auto Pause
You can use the Auto Pause feature to pause the timer
automatically when you stop moving. This feature is
helpful if your activity includes stop lights or other
places where you must stop.
NOTE: History is not recorded while the timer is
stopped or paused.
1 Hold MENU.
2 Select Settings > Activities & Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select the activity settings.
5 Select Auto Pause.
6 Select an option:
• To pause the timer automatically when you stop
moving, select When Stopped.
• To pause the timer automatically when your pace
or speed drops below a specified level, select
Custom.
Enabling Auto Climb
You can use the auto climb feature to detect elevation
changes automatically. You can use it during activities
such as climbing, hiking, running, or biking.
1 Hold MENU.
2 Select Settings > Activities & Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select the activity settings.
5 Select Auto Climb > Status > On.
6 Select an option:
• Select Run Screen to identify which data screen
appears while running.
• Select Climb Screen to identify which data screen
appears while climbing.
• Select Invert Colors to reverse the display colors
when changing modes.
• Select Vertical Speed to set the rate of ascent over
time.
• Select Mode Switch to set how quickly the device
changes modes.
3D Speed and Distance
You can set 3D speed and distance to calculate your
speed or distance using both your elevation change
and your horizontal movement over ground. You
can use it during activities such as skiing, climbing,
navigating, hiking, running, or biking.
FĒNIX
5X
®
®
Turning On and Off the Lap Key
You can turn on the Lap Key setting to record a lap
or a rest during an activity using LAP. You can turn
off the Lap Key setting to avoid recording laps due to
accidental key presses during an activity.
1 Hold MENU.
2 Select Settings > Activities & Apps.
3 Select an activity.
4 Select the activity settings.
5 Select Lap Key.
The lap key status changes to On or Off based on the
current setting.
Using Auto Scroll
You can use the auto scroll feature to cycle through
all of the activity data screens automatically while the
timer is running.
1 Hold MENU.
2 Select Settings > Activities & Apps.
3 Select an activity.
NOTE: This feature is not available for all activities.
4 Select the activity settings.
5 Select Auto Scroll.
6 Select a display speed.
UltraTrac
The UltraTrac feature is a GPS setting that records track
points and sensor data less frequently. Enabling the
UltraTrac feature increases battery life but decreases
the quality of recorded activities. You should use the
UltraTrac feature for activities that demand longer
battery life and for which frequent sensor data updates
are less important.
Power Save Timeout Settings
The timeout settings affect how long your device
stays in training mode, for example, when you are
waiting for a race to start. Hold MENU, select Settings
> Activities & Apps, select an activity, and select the
activity settings. Select Power Save Timeout to adjust
the timeout settings for the activity.
Normal: Sets the device to enter low-power watch
mode after 5 minutes of inactivity.
Extended: Sets the device to enter low-power watch
mode after 25 minutes of inactivity. The extended
mode can result in shorter battery life between
charges.
Removing an Activity or App
1 Hold MENU.
2 Select Settings > Activities & Apps.
3 Select an activity.
4 Select an option:
• To remove an activity from your list of favorites,
33