Garmin driveluxe 51 Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Auto-Navigationssystem Garmin driveluxe 51 herunter. Garmin driveluxe 51 30 Seiten.
Seite drucken
the contact to your situation if you are not able to call or send
a message. This feature requires a connection to
Smartphone Link and an active mobile data connection to
send a message.
• If you have not set up an incident contact, the device
automatically displays the nearest address or geographic
coordinates when it detects an incident. This feature is
helpful if you need to tell emergency personnel your location.
You can select More to view the Where Am I? page.
Setting Up an Incident Contact
Before you can set up an incident detection contact, you must
complete these tasks:
• Connect your device to Smartphone Link
Phone and Connecting to Smartphone Link, page
• Select Settings > Wireless Networks, select your phone
name, and verify the Phone calls option is enabled.
The device must have access to the Smartphone Link app and
to your smartphone phone book during the incident contact
setup. If you do not want to use your device for hands-free
calling, you can disable the Phone calls option after the incident
contact setup is complete.
1
Select Settings > Driver Assistance > Incident
Notification > Continue.
A list of your smartphone contacts appears.
2
Select a contact, and select Next.
3
Verify the contact's phone number, and select Next.
4
Enter your name or nickname, and select Done.
5
Review the sample incident message, and select Next.
6
Follow the on-screen instructions to inform your contact that
you have added them as an incident contact.
NOTE: The incident notification message includes the name
or nickname you entered, but it is not sent from your phone
number. The message is sent using a third-party service, and
you should inform your incident contact that the incident
message will come from an unknown number.
7
Select OK.
8
Review the information, and select Save.
Cancelling an Incident Notification
When the device detects an incident, a message and a voice
prompt inform you that a notification will be sent to your incident
contact. A 60-second countdown timer starts when the incident
is detected, and the device sends the notification automatically
when the timer expires. If you do not want to send the
notification, you can cancel it.
Before the timer expires, select Cancel.
Disabling Incident Notifications
While incident notifications are disabled, the device does not
send an SMS notification when it detects an incident.
1
Select Settings > Driver Assistance > Incident
Notification.
2
Clear the Incident Detection SMS check box.
Navigating to Your Destination
Routes
A route is a path from your current location to one or more
destinations.
• The device calculates a recommended route to your
destination based on the preferences you set, including the
route calculation mode
(Changing the Route Calculation
Mode, page
5) and avoidances
and Areas, page
6).
Navigating to Your Destination
(Pairing with Your
11).
(Avoiding Delays, Tolls,
• You can start navigating to your destination quickly using the
recommended route, or you can select an alternate route
(Starting a Route, page
• If there are specific roads you need to use or avoid, you can
customize the route
(Shaping Your Route, page
• You can add multiple destinations to a route
Location to Your Route, page
Starting a Route
1
Select Where To?, and search for a location
Saving Locations, page
2
Select a location.
3
Select an option:
• To start navigating using the recommended route, select
Go!.
• To choose an alternate route, select , and select a route.
Alternate routes appear to the right of the map.
• To edit the course of the route, select
add shaping points to the route
page
5).
The device calculates a route to the location and guides you
using voice prompts and information on the map
the Map, page
3). A preview of the major roads in your route
appears at the edge of the map for several seconds.
If you need to stop at additional destinations, you can add the
locations to your route
(Adding a Location to Your Route,
page
5).
Starting a Route by Using the Map
You can start route by selecting a location from the map.
1
Select View Map.
2
Drag and zoom the map to display the area to search.
3
If necessary, select
to filter the displayed points of interest
by category.
Location markers ( or a blue dot) appear on the map.
4
Select an option:
• Select a location marker.
• Select a point, such as a street, intersection, or address
location.
5
Select Go!.
Going Home
The first time you start a route home, the device prompts you to
enter your home location.
1
Select Where To? > Go Home.
2
If necessary, enter your home location.
Editing Your Home Location
1
Select Where To? >
2
Enter your home location.
Your Route on the Map
As you travel, the device guides you to your destination using
voice prompts and information on the map. Instructions for your
next turn or exit, or other actions appear across the top of the
map.
3).
5).
(Adding a
5).
(Finding and
6).
> Edit Route, and
(Shaping Your Route,
(Your Route on
> Set Home Location.
3