Garmin ecoRoute ESP Anleitung Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Auto-Navigationssystem Garmin ecoRoute ESP herunter. Garmin ecoRoute ESP 6 Seiten.

Seite drucken

ecoRoute ESP Instructions

The ecoRoute

ESP device connects to your vehicle's OBD

™

II (On-Board Diagnostics) connector. The ecoRoute ESP

device sends data wirelessly to a compatible Garmin GPS

device.

OBD II Connector Location

The location of the OBD II connector varies for each

vehicle. For the best view of the connector, open the driver

door and kneel.

The following are common

locations in which to look for the

OBD II connector:

•

The OBD II connector is often below the steering

column, between the center console and the driver's

door.

•

The OBD II connector might be under a labeled cover.

Remove or open the cover to access the connector.

•

The OBD II connector might be under or behind the ash

tray or near the power outlet in the center console.

Installing the ecoRoute ESP Device

WaRnIng



When installing the device in a vehicle, install the device

securely so it does not interfere with the vehicle operating

controls, such as the foot pedals. Interfering with the

vehicle operating controls can result in an accident, which

could result in injury or death.

Before installing the ecoRoute ESP device, you must find

the OBD II connector in your vehicle.

1. Connect the ecoRoute ESP connector to the OBD II

connector in the vehicle.

ecoRoute ESP

connector

2. Use the cable ties to secure the ecoRoute ESP device

and cable to the vehicle.

190-01132-91_0A.indd 2

Customizing the Cable angle

If the vehicle requires the cable to be at an angle from the

connector, you can use the cable ties to customize the cable

for the installation.

1. Bend the cable around the

OBD II Connector

2. Use a cable tie to secure the

Wirelessly Connecting with a garmin

gPS Device

Before wirelessly connecting to a GPS device, you must

install the ecoRoute ESP device.

1. Start the vehicle.

2. Turn on the GPS device.

3. Bring the GPS device within 10 meters (33 feet) of the

4. From the Tools menu, touch

The LED turns blue when the ecoRoute ESP device is

connected to your GPS device.

about the Wireless Connection to the gPS

Device

The ecoRoute ESP device and the GPS device

Vehicle OBD II

automatically connect when they are turned on and are

connector

within 10 meters (33 feet) of each other.

When it is not connected to a GPS device, the ecoRoute

ESP device records the vehicle information and sends the

data to the GPS device the next time they connect.

RESET key

LED

connector to suit the installation.

cable to the connector to fit a

variety of installation situations.

The LED turns green when the ecoRoute ESP device is

communicating with your vehicle.

ecoRoute ESP device.

ecoRoute

Connection.

ecoRoute ESP

device

Cable ties

Cable Secured

to the Connector

ESP

9/14/2009 12:18:26 PM