Brother 884-B31 Bedienungsanleitungen - Seite 15

Blättern Sie online oder laden Sie pdf Bedienungsanleitungen für Nähmaschine Brother 884-B31 herunter. Brother 884-B31 36 Seiten. Cover stitch machine / top cover stitch machine

Seite drucken

CHAPTER 2

PREPARATION BEFORE THREADING

Thread tree

Raise the telescoping thread tree to its highest

position. Make sure that the thread holders are

in alignment above the spool pins as illustrated

below.

Cover stitch model

Top cover stitch model

1 Thread holder on thread tree

2 Spool pin

3 Correct position

Using the thread

spool cap

When using sewing thread spools, the thread

spool cap should be used as illustrated below.

Make sure that the spool notch is on the bottom.

1 Thread spool cap

CAUTION

Before using a thread spool, be sure to remove the

spool cushion.

Before using loosely spun nylon thread, be sure to

install the spool cushion.

If the thread spool cap is not fully pushed down,

the thread may become entangled on the spool pin

or the needle may bend or break.

Spool mat

When using thread spools or loosely spun thread

that easily slips off the spool, place this mat under

the spool.

This prevents the thread from becoming entangled

on the spool pin.

Using the spool mat

1. Remove the spool cushion, and then place the

spool mat on the spool pin.

2. Place the thread spool (with the spool notch at

the bottom) on the spool pin, and then place the

thread spool cap on top and fully push it down.

1 Spool cushion

2 Thread spool cap

3 Spool support

4 Spool mat

CAUTION

If the thread spool cap is not fully pushed down

against the thread spool, the thread may become

entangled on the spool pin or the needle may bend

or break.