Garmin NavComm SL30 Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Auto-Navigationssystem Garmin NavComm SL30 herunter. Garmin NavComm SL30 48 Seiten. Vhf transceiver
Auch für Garmin NavComm SL30: Kurzreferenz-Handbuch (2 seiten), Einrichtung (2 seiten)

Seite drucken

Advanced Operation

Comm Radio Mode

Monitoring the Standby Comm channel

The Frequency Monitoring function allows you to

monitor the Standby frequency for activity, while listening

to the Active frequency.

Press the

standby frequency. A small "m" will replace the "s" in

front of the Standby frequency.

When the Active frequency receives a signal, the unit will

switch automatically to the Active frequency. The Active

frequency quality is not affected. The Frequency Monitor

function is turned off when you flip/flop frequencies,

recall a frequency, or press

canceled by switching to Nav mode.

Saving a Comm channel

You can save the Standby frequency and give it a name of

up to four characters. A combination of up to 250 Comm

and Nav frequencies may be saved. After 250 Nav and

Comm frequencies are saved, you will get a "Database

Full" message. You will have to remove frequencies before

any more can be saved.

A frequency type can also be assigned along with the

saved selection. Types available include: Tower (TWR),

Ground Control (GND), ATIS (ATS), Air Traffic

Frequency (ATF), Approach (APP), Arrival (ARR),

Automated Weather Station (AWS), Clearance (CLR),

Common Traffic Advisory Frequency (CTF), Departure

Control (DEP), Flight Service Station (FSS), Remote

Flight Service Station (RFS), Unicom (UNI), and

Mandatory Frequency (MF).

COM

key in the Comm function to listen to the

119.10 m124.55

Advanced Operation

PDX

from 115

COM

again. Monitoring is not