Garmin NavComm SL30 Benutzerhandbuch - Seite 34

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Auto-Navigationssystem Garmin NavComm SL30 herunter. Garmin NavComm SL30 48 Seiten. Vhf transceiver
Auch für Garmin NavComm SL30: Kurzreferenz-Handbuch (2 seiten), Einrichtung (2 seiten)

Seite drucken

Advanced Operation

Comm Options

The Comm Options selection allows you to set up options

available for Comm radio operation.

1. In the System mode rotate the

the Com Options page. Press

2. Rotate the

RF Signal Level

The RF Level function shows the relative signal strength

of the active frequency. The value will change as signal

conditions change. This information can be used by your

dealer to adjust the radio squelch break.

Comm Noise Level

The Comm Noise Level function shows the relative

received noise level of the active frequency. The value will

change as signal conditions change.

Mic 1 and 2 Squelch

The input levels required to break squelch by the

microphones are set by these values. Lower numbers

indicate a higher input level necessary to break squelch.

Turn the

change the value. The range is from 0 to 100.

Transmit Mic

The Transmit Microphone page allows you to control

which microphone is permitted to transmit. You may

choose Mic 1, 2, or both. To adjust the Transmit Mic

control:

1. In the Com Options selection, rotate the

to display the Transmit Mic page.

2. Rotate the

MIC1+MIC2.

3. Select an appropriate frequency, key the transmitter,

and talk into the microphones to check for the intended

operation.

LARGE

knob to view the Com Options

LARGE

knob to view Turn the

SMALL

knob to select MIC1, MIC2, or

LARGE

knob to display

ENT

SMALL

LARGE

knob to

knob