Brother 885-X03 Betriebshandbuch - Seite 21

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Pull out about 10 cm (4 inches) of both

3

threads and put them toward the back of

the machine under the presser foot.

2

1 Upper thread

2 Lower thread

■ For models equipped with a quick-set

bobbin

You can begin sewing immediately without drawing

up the bobbin thread.

When sewing gathers or darts, you can draw up the

lower thread by hand so that some thread will be

left over. Before you draw up the lower thread, put

the bobbin back in.

Remove the bobbin cover, and then

1

reinstall the bobbin.

Pass the thread along the slit in the

2

direction of the arrow, and leave it there

without cutting it.

• The bobbin cover should still be removed.

Draw up the lower thread as described in

3

the previous steps

Replace the bobbin cover.

4

1

to

.

1

3

1

20