Garmin Oregon 300 Benutzerhandbuch - Seite 42
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Auto-Navigationssystem Garmin Oregon 300 herunter. Garmin Oregon 300 48 Seiten. Oregon series
Auch für Garmin Oregon 300: Kurzreferenz-Handbuch (2 seiten), Schnellstart-Handbuch (8 seiten), Benutzerhandbuch (26 seiten), (Dänisch) Handbuch (48 seiten)
Seite drucken
Appendix
Attaching the Carabiner
A carabiner with a clip comes with the
Oregon 300 and 400 series units and is
optional with 200 series units.
To attach the carabiner clip:
1. Position the carabiner clip in the slots
on the mounting spine of the Oregon.
Carabiner
2. Slide the clip up until it locks in place.
To remove the carabiner clip, lift the
bottom of the clip and slide the carabiner
clip off the mounting spine.
Calibrating the
Touchscreen
The Oregon screen does not normally
require calibration. However, if the
buttons do not seem to be responding
properly, use the following process.
To calibrate the touchscreen:
1. While the unit is turned off, press and
Mounting spine
2. Follow the instructions on the screen
Carabiner clip
3. Touch OK.
Software License
Agreement
BY USING THE OREGON, YOU AGREE
TO BE BOUND BY THE TERMS AND
CONDITIONS OF THE FOLLOWING
SOFTWARE LICENSE AGREEMENT. PLEASE
READ THIS AGREEMENT CAREFULLY.
Garmin grants you a limited license to use
the software embedded in this device (the
"Software") in binary executable form in the
Power
hold the
approximately 30 seconds.
until "Calibration is complete" is
displayed.
Oregon Series Owner's Manual
key for