Brother 888-N20 Betriebshandbuch - Seite 17

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Nähmaschine Brother 888-N20 herunter. Brother 888-N20 32 Seiten.
Auch für Brother 888-N20: Betriebshandbuch (32 seiten)

Seite drucken

Automatic reverse/reinforcement

stitching

Turn on the automatic reverse/reinforcement stitching

function before sewing, and the machine will

automatically sew reinforcement stitches (or reverse

stitches, depending on the stitch pattern) at the

beginning and end of sewing�

Turn on the automatic reverse/reinforcement

stitching� (page 7)

Select a stitch�

Set the fabric in the start position and start

sewing�

Reverse stitches (or reinforcement stitches)

The machine will automatically sew reverse stitches (or

reinforcement stitches) and then continue sewing�

Note

• You can pause or resume sewing by pressing

("Start/Stop" button) while sewing� ★

Once you have reached the end of the stitching,

press

(Reverse/Reinforcement stitch button)�

Reverse stitches (or reinforcement stitches)

The machine will sew reverse stitches (or

reinforcement stitches) and stop�

Thread tension

The thread tension will affect the quality of your

stitches� You may need to adjust it when you change

fabric or thread�

Note

• We recommend that you do a test sample on scrap

of a fabric before you start to sew�

n Correct tension

* Too much or too little tension will weaken your seams

or cause puckers on your fabric�

Wrong side

Right side

Upper thread

: Only for some models�

★

Bobbin thread

n Upper tension is too tight

Note

• If the bobbin thread was incorrectly threaded,

the upper thread may be too tight� In this case,

refer to "Winding/Installing the bobbin" (page

7) and rethread the bobbin thread�

Loops will appear on the

right side of the fabric�

n Upper tension is too loose

Note

• If the upper thread was incorrectly threaded,

the upper thread may be too loose� In this case,

refer to "Upper threading" (page 9) and

rethread the upper thread�

Loops appear on the

wrong side of the fabric�

Note

• If the upper thread is not threaded correctly or

the bobbin is not installed correctly, it may not be

possible to set the correct thread tension� If the

correct thread tension cannot be achieved, rethread

the upper thread and insert the bobbin correctly�

Utility Stitches

You can see the "Stitch chart" from

" http://s�brother/cmkag/ "�

Overcasting stitches

Sew overcasting stitches along the edges of cut fabric

to prevent them from fraying�

Attach overcasting foot "G"�

Select a stitch�

* Stitches may differ depending on the model� Check

stitch selections on the machine's body, and then

select the stitch number�

Solution

Reduce the upper thread

tension�

Solution

Increase the upper thread

tension�