Garmin VIEO RV 750 Series Benutzerhandbuch - Seite 34

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Auto-Navigationssystem Garmin VIEO RV 750 Series herunter. Garmin VIEO RV 750 Series 38 Seiten.

Seite drucken

Select an option:

• To install all available updates, click Install All.

• To install a specific update, click View Details, and click

Install next to the update you want.

The Garmin Express application downloads and installs the

updates onto your device. Map updates are very large, and

this process may take a long time on slower internet

connections.

NOTE: If a map update is too large for the internal storage of

the device, the software may prompt you to install a microSD

card in your device to add storage space

Memory Card for Maps and Data, page

Follow the on-screen instructions during the update process

to finish installing updates.

For example, during the update process, the Garmin Express

application may instruct you to disconnect and reconnect

your device.

Device Care

Avoid dropping your device.

Do not store the device where prolonged exposure to extreme

temperatures can occur, because it can cause permanent

damage.

Never use a hard or sharp object to operate the touchscreen, or

damage may result.

Do not expose the device to water.

Cleaning the Touchscreen

Use a soft, clean, lint-free cloth.

If necessary, lightly dampen the cloth with water.

If using a dampened cloth, turn off the device and disconnect

the device from power.

Gently wipe the screen with the cloth.

Troubleshooting

My device is not acquiring satellite signals

• Verify the location services feature is enabled

Disabling Location Services, page

• Take your device out of parking garages and away from tall

buildings and trees.

• Remain stationary for several minutes.

My device does not connect to my phone

• Select

> Bluetooth.

The Bluetooth option must be enabled.

• Enable Bluetooth wireless technology on your phone and

bring your phone within 10 m (33 ft.) of the device.

• Verify your phone is compatible.

Go to

www.garmin.com/bluetooth

• Complete the pairing process again.

To repeat the pairing process, you must unpair your phone

and device

(Deleting a Paired Bluetooth Device, page

(Installing a

28).

NOTICE

(Enabling or

26).

for more information.

and complete the pairing process

Smartphone, page

My phone is not listed as a Bluetooth audio

source

The Bluetooth audio source requires a separate Bluetooth

connection with your smartphone. To use your phone as a

Bluetooth media source, you must pair it separately in the Music

app

(Connecting a Compatible Bluetooth Device, page

Network Troubleshooting

If you cannot see or connect to FUSION PartyBus devices on

the network, check the following:

• Verify that only one device, either a stereo or a router, is

configured as a DHCP server.

• Verify that all FUSION PartyBus devices, network switches,

routers, and wireless access points are connected to the

network and turned on.

• Verify that wireless FUSION PartyBus devices are connected

to a wireless router or wireless access point on the network.

• If you configured static IP addresses, verify that every device

has a unique IP address, that the first three sets of numbers

in the IP addresses match, and that the subnet masks on

every device are identical.

• If you have made configuration changes that might be

causing networking issues, reset all network settings to

factory defaults.

Network Status Icons

A network-status icon is shown on some screens of the stereo.

You can refer to this table to understand the appearance of the

icon and help diagnose issues with the FUSION PartyBus

network

(Network Troubleshooting, page

The stereo is configured for a wired network connection and

connected correctly to a wired network using an Ethernet cable.

The stereo is configured for a wired network connection, but cannot

detect the wired network. An Ethernet cable may not be connected

or there may be other problems with the network.

The stereo is configured as a wireless access point.

The stereo is configured as a wireless client and connected to a

wireless access point. The number of bars indicates the signal

strength.

The stereo is configured as a wireless client, but is not connected

to a wireless access point. There may be a problem with the

connection settings or with the wireless access point.

Data Management

You can store files on your device. The device has a memory

card slot for additional data storage.

NOTE: The device is not compatible with Windows

Windows NT

, and Mac

About Memory Cards

You can purchase memory cards from an electronics supplier,

or purchase pre-loaded Garmin mapping software

(www.garmin.com). In addition to map and data storage, the

memory card can be used to store files such as maps, images,

geocaches, routes, waypoints, and custom POIs.

Installing a Memory Card for Maps and Data

You can install a memory card to increase the storage space for

maps and other data on your device. You can purchase memory

cards from an electronics supplier, or go to

12),

/maps

to purchase a memory card with pre-loaded Garmin

mapping software. The device supports microSD memory cards

(Pairing with Your

11).

28).

Appendix

OS 10.3 and earlier.

www.garmin.com

15).

95, 98, Me,

Troubleshooting