AlkaViva Athena Classic Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch für Luftionisator AlkaViva Athena Classic herunter. AlkaViva Athena Classic 2 Seiten.

Quick Connect Fitting Release

Install:

Insert 1/4" tubing into Quick Connect Fitting

and PUSH IN firmly until it can't go further.

Removal

Press here

Dust Pre-Filter

A dust pre-filter is included with all ionizer models. The dust pre-filter is

pre-installed on the 1/4" tubing that should be installed at the tap water

inlet. See photos below.

2. Install at Tap Water

1. Dust Pre-Filter

Inlet.

comes attached.

MANUAL UPDATES

IMPORTANT!

refers to the Flow Valve. This valve is no longer included with

this ionizer and your ionizer will not match this photo.. This

step is no longer needed.

Your ionizer no longer comes with 2 Calcium Inserts, but with

Calcium Insert for Soft Water and

placed in Mineral Port.

Install

Removal:

Hold Quick Connect Fitting end with thumb and

index finger. Press in on the ring while pulling out

the 1/4" tubing in opposite direction.

3. Installed.

Pages #4 and #9 in the Athena Classic manual

Scale Guard Insert for Hard Water to be

Read Me First!

Athena Classic

Protect Your Investment

Step 1 - Read the "Read Me First"

Step 2 - Watch Installation Video

Refer to video link in "Read Me First"

Step 3 - Test Your Tap Water

Hard Water Test Strip included

Refer to instructions

Step 4 - Install Your Ionizer

Step 5 - Activate Your Warranty

Step 6 - Enjoy Your Water!