Garmin GPS 16-HVS Gebrauchsanweisung - Seite 5

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für GPS-System für die Schifffahrt Garmin GPS 16-HVS herunter. Garmin GPS 16-HVS 30 Seiten. Instruction manual
Auch für Garmin GPS 16-HVS: Referenzhandbuch (1 seiten), Technische Daten (40 seiten), Technische Daten (37 seiten), Konformitätserklärung (2 seiten), Gebrauchsanweisung (30 seiten)

GPS16-HVS GPS Receiver

1. Overview

FIGURE 1. GPS16-HVS GPS Receiver

The GPS16-HVS is a complete GPS receiver manufactured by Garmin

International, Inc. The GPS16-HVS has been configured by Campbell

Scientific (Canada) Corp. (CSI) to work with CSI dataloggers.

The CR1000, CR3000, CR800, and CR850 dataloggers use serial input

instructions and string handling functions to read, parse and store GPS data.

The CR10X, CR23X, and other dataloggers that support P15 or the SDM-SIO4

four channel serial interface can be used with the GPS16-HVS. The CR510

and CR200-series do not support serial data input. See Appendix A for

information regarding the CR10X, CR23X, CR5000, CR9000(X) and SDM-

SIO4 applications.

The GPS16-HVS includes the GPS receiver and antenna in the same housing

with one cable for the power supply and communications. The GPS antenna

must have a clear view of the sky. Generally the GPS antenna will not work

indoors.

The GPS16-HVS is a 12-channel GPS receiver that supports FAA Wide Area

Augmentation System (WAAS) or RTCM differential GPS. Also supported is

the 1 Pulse Per Second (PPS) timing signal. The cable connections provided

with the GPS16-HVS do not support differential GPS correction. The cable

can be modified by the user if differential correction is required.

Wiring for the GPS16-HVS can be done with or without the RJ45 connector.

When shipped from Campbell Scientific, the GPS16-HVS has an RJ45

connector attached to the cable end. The GPS16-HVS can be purchased with

an RJ45 adapter with flying leads, an RJ45 to DB9 RS-232 adapter, and the

C1737 mount. Table 2-1 is the wiring description for the RJ45 adapter with

flying leads. To use Table 2-2, the RJ45 connector must be cut off the cable.