Garmin GPS 400W Kurzreferenz-Handbuch - Seite 9

Blättern Sie online oder laden Sie pdf Kurzreferenz-Handbuch für GPS-System für die Schifffahrt Garmin GPS 400W herunter. Garmin GPS 400W 25 Seiten. Garmin gps receiver quick reference guide
Auch für Garmin GPS 400W: Nachtrag zum Pilotenhandbuch (24 seiten), Nachtrag zum Pilotenhandbuch (50 seiten), Kurzreferenz (23 seiten), Nachtrag zum Pilotenhandbuch (24 seiten), Ergänzendes Handbuch (12 seiten)

Seite drucken

1. Model Descriptions

SCREEN LAYOUT/CURSORS/FREQ SELECTION/DATA ENTRY

Screen Layout (windows)

Active Frequency on top & Standby on bottom

(active window highlighted by cursor)

{

COM

Window

{

VLOC

Window

The 400W-series display is divided into four separate

"windows" (or screen areas). The top left 1/4 of the display

provides a COM window (top two lines) and a VLOC

window (bottom two lines) The three lines at the bottom

left of the display are used for terrain, flight phase, and

GPS integrity annunciators. The right 3/4 of the display

consists of a GPS window, which is where you'll find the

various navigation, waypoint information and settings

"pages."

Each unique screen of information is referred to as

a page. Pages are typically selected using the small and

large right knobs—with the cursor removed from the

GPS window. See the following page for details on arrange-

ment of the 400W-series main pages.

Cursors

There are two separate cursors: a tuning cursor and a

GPS window cursor. The tuning cursor is used to select

the standby COM or VLOC frequency. If desired, press the

small left knob to move the tuning cursor to the VLOC

window. Then, use the small and large left knobs to

select the desired frequency. The COM and VLOC flip-

flop keys are used to swap the active and standby frequen-

cies. Push in on small right knob and then turn the large

right knob to move the GPS window cursor around the

page.

Frequency Selection

If the tuning cursor is not currently in

the desired window (COM or VLOC),

{

press the small left knob momentarily

to switch the highlight between the

COM and VLOC windows. Adjusting the

GPS

frequencies with the large and small

Window

left knobs will affect the standby fre-

quency.

Turn the large left knob to select

the desired megahertz (MHz) value.

For example, the "117" portion of the

frequency "117.80".

Turn the small left knob to select the

desired kilohertz (kHz) value. For exam-

ple, the ".80" portion of the frequency

"117.80".

To activate the selected frequency, press the

appropriate flip-flop key to swap the COM or

VLOC frequency from the standby into the active

window.

To Quickly Tune and Activate the 121.500 Emergency

Channel (GNS 430W and GNC 420W only)

Press and hold the COM flip/flop key for approxi-

mately two seconds.

Data Entry

Data is entered in the GPS

window using the large and

small right knobs. The large

right knob is used to move

the cursor between fields. The

small right knob is used to

select individual characters at

the highlighted cursor location.

190-00356-01 Rev F