alkitronic XE Series Handbuch für Betrieb und Wartung - Seite 6
Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Water Pump alkitronic XE Series herunter. alkitronic XE Series 16 Seiten. Battery powered torque multiplier
Seite drucken
Operating and service manual
4. Operation alkitronic® EAF
The alkitronic® EAF must not be damp or wet, neither
operated nor stored in moist or humid environment.
Always provide rain protection. Before first use al-
ways fully charge the battery pack. Before any later
use always check the charge status of the battery
pack and recharge, also in case of power decrease.
4.1
Starting
4.1.1 alkitronic® Li-Ion battery pack
Remove / charge / insert or change
Remove battery pack
6
Push safety catch (5), pull battery pack to the front (6).
Charge battery pack
Push the battery pack com-
pletely onto the seat of the
charger.
Insert battery pack
Push the battery pack into the battery seat of the power tool
all the way (7) until the safety catch locks audibly.
5
7
6
4.1.2 Battery pack, capacity and signal display*
Push button (8) on the battery pack and check the
charge status. If the battery pack is almost empty it
must be recharged! Replace the battery pack on the
power tool.
If one of the LEDs flashes the battery pack is almost
empty. The electronic circuitry protects the battery
pack against damage due to complete discharge. Re-
place battery back on the power tool. Recharge bat-
tery pack!
* The charge status indicators are approximate and may be
slightly different depending on the battery pack type.
8
8