AEG 911434535 Benutzerhandbuch - Seite 24

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Geschirrspüler AEG 911434535 herunter. AEG 911434535 28 Seiten.

Seite drucken

www.aeg.com

Problem and alarm code

The appliance trips the cir-

cuit-beaker.

Once you have checked the appliance,

deactivate and activate the appliance. If

the problem occurs again, contact an

Authorised Service Centre.

For alarm codes not described in the

table, contact an Authorised Service

Centre.

11.1 The product number

code (PNC)

If you contact an Authorised Service

Centre, you need to provide the product

number code of your appliance.

The PNC can be found on the rating

plate on the appliance door. You can

also check the PNC on the control panel.

11.2 The washing and drying results are not satisfactory

Problem

Poor washing results.

Poor drying results.

Possible cause and solution

• The amperage is insufficient to supply simultaneously all

the appliances in use. Check the socket amperage and

the capacity of the meter or turn off one of the applian-

ces in use.

• Internal electrical fault of the appliance. Contact an Au-

thorised Service Centre.

Before checking the PNC, make sure the

appliance is in the programme selection.

1. Press and hold simultaneously

The display shows the PNC of your

appliance.

2. To exit the PNC presentation, press

and hold simultaneously

for about 3 seconds.

The appliance returns to the programme

selection.

Possible cause and solution

• Refer to "Daily use", "Hints and tips" and the basket

loading leaflet.

• Use more intensive washing programme.

• Activate the ExtraPower option to improve the wash-

ing results of a selected programme.

• Clean spray arm jets and filter. Refer to "Care and

Cleaning".

• Tableware was left for too long inside the closed ap-

pliance. Activate AirDry to set the automatic opening

of the door and to improve the drying performance.

• There is no rinse aid or the dosage of rinse aid is not

sufficient. Fill the rinse aid dispenser or set the level of

rinse aid to a higher level.

• The quality of the rinse aid can be the cause.

• We recommend to use rinse aid always, even in com-

bination with multi-tablets.

• Plastic items may need to be towel dried.

• The programme does not have the drying phase. Re-

fer to "Programmes overview".

for about 3 seconds.

and