Garmin nuvi 500-Series Benutzerhandbuch - Seite 40

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für GPS-System für die Schifffahrt Garmin nuvi 500-Series herunter. Garmin nuvi 500-Series 44 Seiten. Flush mount template
Auch für Garmin nuvi 500-Series: Kurzreferenz-Handbuch (2 seiten), Benutzerhandbuch (28 seiten), Benutzerhandbuch (38 seiten), Wichtige Informationen (1 seiten), Installationsanleitung Handbuch (6 seiten), Benutzerhandbuch (50 seiten)

Seite drucken

Select Settings > System > Display > Screenshot Capture

> On.

Go to a screen you want to capture.

Hold Home for at least six seconds.

Copying Screenshots to a Computer

Remove the memory card from the chartplotter, and insert it

into a card reader that is attached to a computer.

From Windows ® Explorer, open the Garmin\scrn folder on

the memory card.

Copy a .bmp file from the card and paste it to any location on

the computer.

Troubleshooting

My device will not acquire GPS signals

If the device is not acquiring satellite signals, there could be few

causes. If the device has moved a large distance since the last

time it has acquired satellites or has been turned off for longer

than a few weeks or months, the device may not be able to

acquire the satellites correctly.

• Ensure the device is using the latest software. If not, update

the device software

(Updating the Device

• If the device is using an internal GPS antenna, make sure

the device has a clear view of the sky so that the internal

antenna can receive the GPS signal. If it is mounted inside of

a cabin, it should be close to a window so it can receive the

GPS signal. If the device is mounted inside a cabin and

cannot be placed in a location where the device can acquire

satellites, use an external GPS antenna.

• If the device is using an external GPS antenna, make sure

the antenna is connected to the chartplotter or the NMEA

network.

• If the device has more than one GPS antenna source, select

a different source

(Selecting the GPS

My device will not turn on or keeps turning off

Devices erratically turning off or not turning on could indicate an

issue with the power supplied to the device. Check these items

to attempt to troubleshoot the cause of the power issue.

• Make sure the power source is generating power.

You can check this several ways. For example, you can

check whether other devices powered by the source are

functioning.

• Check the fuse in the power cable.

The fuse should be located in a holder that is part of the red

wire of the power cable. A 3 Amp fuse is used in this power

cable. Check the fuse to make sure there is still a connection

inside of the fuse. You can test the fuse using a multimeter. If

the fuse is good, the multimeter reads 0 ohms.

• Check to make sure the device is receiving is at least 10

volts, but 12 volts is recommended.

To check the voltage, measure the female sockets 8 (power)

and 2 (ground) of the power cable for DC voltage. If the

voltage is less than 10 volts, the device will not turn on.

• If the device is receiving enough power but does not turn on,

contact Garmin product support at www.garmin.com/support.

My device is not creating waypoints in the correct

location

You can manually enter a waypoint location to transfer and

share data from one device to the next. If you have manually

entered a waypoint using coordinates, and the location of the

point does not appear where the point should be, the map

datum and position format of the device may not match the map

datum and position format originally used to mark the waypoint.

Software).

Source).

Position format is the way in which the GPS receiver's position

appears on the screen. Commonly displayed as latitude/

longitude in degrees and minutes, with options for degrees,

minutes and second, degrees only, or one of several grid

formats.

Map datum is a math model which depicts a part of the surface

of the earth. Latitude and longitude lines on a paper map are

referenced to a specific map datum.

Find out which map datum and position format was used

when the original waypoint was created.

If the original waypoint was taken from a map, there should

be a legend on the map that lists the map datum and position

format used to create that map. Most often this is found near

the map key.

On the chartplotter, select Settings > Units.

Select the correct map datum and position format settings.

Create the waypoint again.

The touchscreen is not responding to my touches

If the screen is not properly responding to your touches, you

should calibrate the screen. See

The chartplotter touchscreen does not normally require

calibration.

NMEA 0183 Information

Type

Sentence

Transmit

GPAPB

GPBOD

GPBWC

GPGGA

GPGLL

GPGSA

GPGSV

GPRMB

GPRMC

GPRTE

GPVTG

GPWPL

GPXTE

PGRME

PGRMM

PGRMZ

SDDBT

SDDPT

SDMTW

SDVHW

Receive

DPT

DBT

MTW

VHW

WPL

DSC

DSE

Calibrating the

Touchscreen.

Description

APB: Heading or track controller

(autopilot) sentence "B"

BOD: Bearing (origin to

destination)

BWC: Bearing and distance to

waypoint

GGA: Global positioning system

fix data

GLL: Geographic position

(latitude and longitude)

GSA: GNSS DOP and active

satellites

GSV: GNSS satellites in view

RMB: Recommended minimum

navigation information

RMC: Recommended minimum

specific GNSS data

RTE: Routes

VTG: Course over ground and

ground speed

WPL: Waypoint location

XTE: Cross track error

E: Estimated error

M: Map datum

Z: Altitude

DBT: Depth below transducer

DPT: Depth

MTW: Water temperature

VHW: Water speed and heading

Depth

Depth below transducer

Water temperature

Water speed and heading

Waypoint location

Digital selective calling

information

Expanded digital selective calling

Appendix