AEG F55210VI0 Benutzerhandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Geschirrspüler AEG F55210VI0 herunter. AEG F55210VI0 20 Seiten.
Seite drucken
8
www.aeg.com
2. Close the appliance door.
The programme continues from the
point of interruption.
Cancelling a programme
Press and hold Programmes for about 3
seconds to cancel the programme.
Make sure that there is
detergent in the detergent
dispenser before you start a
new programme.
End of a programme
When a programme is completed, an
intermittent acoustic signal sounds for
approximately 8 seconds.
6. DAILY USE
6.1 Use of the appliance
1. Fill the salt container with salt for
dishwashers.
2. Fill the rinse aid dispenser with rinse
aid.
3. Load the basket.
4. Open the water tap.
5. Set the correct programme for the
type of load and the degree of soil.
6. Add the detergent.
7. Start the programme.
6.2 Use of dishwasher salt
Hard water contains a high quantity of
minerals that can cause damage to the
appliance and bad washing results. The
water softener neutralises these minerals.
Contact your local water authority for
information about the hardness of the
water in your area.
CAUTION!
Only use salt specifically
designed for dishwashers.
Other types of salt will cause
damage to the appliance.
Filling the salt container
1. Turn the cap of the salt container
counterclockwise and remove it.
1. Press the on/off button to deactivate
the appliance.
2. Close the water tap.
• Let the dishes become
cold before you remove
them from the appliance.
Hot dishes can be easily
damaged.
• There can be water on
the sides and on the door
of the appliance.
Stainless steel becomes
cool more quickly than
the dishes.
2. Put 1 litre of water in the salt
container (Only for the first time).
3. Use the funnel to fill the salt
container with dishwasher salt.
4. Remove the salt around the opening
of the salt container.
5. Turn the cap of the salt container
clockwise to close the salt container.
Water and salt can come out
from the salt container when
you fill it which poses a risk
of corrosion. To prevent it,
start a programme
immediately after filling the
salt container.
Refill the salt container when
salt indicator on the display
comes on.