AEG F55402VI0P Benutzerhandbuch - Seite 18

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Geschirrspüler AEG F55402VI0P herunter. AEG F55402VI0P 24 Seiten.
Auch für AEG F55402VI0P: Benutzerhandbuch (16 seiten)

Seite drucken

www.aeg.com

11.1 The washing and drying results are not satisfactory

Problem

Poor washing results.

Poor drying results.

There are whitish streaks or

bluish layers on glasses and

dishes.

There are stains and dry water

drops on glasses and dishes.

The dishes are wet.

The interior of the appliance is

wet.

Unusual foam during washing. • Use the detergent for dishwashers only.

Traces of rust on cutlery.

Possible cause and solution

• Refer to "Daily use", "Hints and tips" and basket

loading leaflet.

• Use more intensive washing programmes.

• If you use multi-tablets, always switch on the option

Multitab.

• Clean spray arm jets and filter. Refer to "Care and

Cleaning".

• Tableware has been left for too long inside a closed

appliance.

• There is no rinse aid or the dosage of rinse aid is not

enough. Set the rinse aid dispenser to a higher level.

• Plastic items may need to be towel dried.

• We recommend to always use rinse aid, even in com-

bination with multi-tablets.

• The release quantity of rinse aid is too much. Adjust

the rinse aid level to a lower level.

• The quantity of detergent is too much.

• The released quantity of rinse aid is not sufficient. Ad-

just the rinse aid level to a higher level.

• The quality of the rinse aid can be the cause.

• The programme does not have a drying phase or has

a drying phase with low temperature.

• The rinse aid dispenser is empty.

• The quality of the rinse aid can be the cause.

• The quality of the multi-tablets can be the cause. Try a

different brand or activate the rinse aid dispenser and

use rinse aid and multi-tablets together.

• Keep the dishwasher door ajar for some time before

removing tableware.

• This is not a defect of the appliance. it is caused by

the humidity in the air that condenses on the walls.

• There is a leak in the rinse aid dispenser. Contact an

Authorised Service Centre.

• There is too much salt in the water used for washing.

Refer to "The water softener".

• Silver and stainless steel cutlery were placed together.

Avoid to put silver and stainless steel items close to-

gether.