Garmin GMR Fantom 56 Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schiffsausrüstung Garmin GMR Fantom 56 herunter. Garmin GMR Fantom 56 12 Seiten.
Auch für Garmin GMR Fantom 56: Installationsanleitung Handbuch (19 seiten)

Seite drucken

Route the power cable to your vehicle power outlet.

The included vehicle power cable is designed to be routed

out of sight. It is long enough to route around the windshield

in most vehicles, and you can hide the thin cable along or

behind the trim or headliner.

Plug the other end of the vehicle power cable into a power

outlet in your vehicle.

If necessary, turn on the vehicle ignition switch to provide

power to the power outlet in your vehicle.

The device turns on.

Follow the on-screen instructions to complete the initial

device setup.

The camera view appears.

Adjust the position of the camera to capture the desired field

of view.

Setting the Camera Placement

You can mount the device in the left, center, or right of your

windshield. For the best performance, you should set the

Camera Placement option to indicate the location of your device

in the vehicle.

Select Settings > Driver Assistance > Camera Placement.

Select Horizontal Placement, and select the horizontal

placement of your camera.

Select Vehicle Height.

Select an option:

• If you are driving a large vehicle, like a full size van or

truck, select Tall.

• If you are driving a car, select Normal.

Turning On the Device Manually

NOTE: When the device is connected to an ignition-switched

power outlet, it turns on automatically when you turn on the

vehicle.

Select .

The device turns on.

Turning Off the Device Manually

NOTE: When the device is connected to an ignition-switched

power outlet, it turns off automatically when you turn off the

vehicle.

Hold

for 3 seconds.

The device turns off.

Dash Cam Recording

Some jurisdictions regulate or prohibit use of this device. It is

your responsibility to know and comply with applicable laws and

NOTICE

rights to privacy in jurisdictions where you plan to use this

device.

The dash cam records video to the camera memory card

(Installing a Memory Card, page

immediately starts recording video when it turns on, and it

continues recording until it is turned off. If the memory card is

full, the device automatically deletes the oldest unsaved video to

create space for new video.

When the option to promptly delete unsaved video is enabled,

the device continually deletes unsaved video more than three

minutes old and deletes all unsaved video each time it is

powered off. This feature is available only for specific regions

and is enabled by default for some of those regions. When the

camera is set to a supported region, you can enable or disable

this feature in the camera settings

You can save a video recording to prevent it from being

overwritten or deleted.

Saving a Video Recording

By default, the device uses a sensor to detect a possible

incident and saves video footage automatically before, during,

and after the detected event. You can also save video files

manually at any time.

Hold

The device saves the video footage before, during, and after

you select

The memory card has limited storage. After you save a video

recording, you should transfer the recording to your computer or

other external storage location for permanent storage

and Photos on Your Computer, page

Taking a Picture

You can take a picture with this device.

From the viewfinder, select

The device saves the picture to the memory card.

Event Detection

By default, the device uses a sensor to detect possible incidents

and saves video footage automatically before, during, and after

the detected event. The video footage is stamped with the time,

date, and location of the event.

Viewing Videos and Pictures

NOTE: The device stops recording and alerts are disabled while

viewing videos or pictures.

Select

> Gallery.

Select an option:

NOTE: Unsaved videos and Travelapse

available when the option to promptly delete unsaved video is

enabled

(Camera Settings, page

• To view videos you saved, select Saved Videos.

• To view parked videos you saved, select Parked Videos.

• To view saved photos, select Pictures.

• To view Travelapse videos, select Travelapse.

• To view recent video footage that has not been saved,

select Unsaved Videos.

Select a video or photo.

Connecting the Device to Your Computer

You can view videos and photos on your computer using a

micro-USB cable.

Plug the small end of the micro-USB cable into the port on

the device.

1). By default, the device

(Camera Settings, page

5).

(Videos

3).

™

videos are not

5).

Dash Cam Recording