AEG FAVORIT 2807 Betriebsanleitung - Seite 34

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Geschirrspüler AEG FAVORIT 2807 herunter. AEG FAVORIT 2807 40 Seiten.

Connection instructions

Any electrical work required to install this appliance should be carried

out by a qualified electrician or competent person.

Any plumbing work required to install this appliance should be carried

out by a qualified plumber or competent person.

Remove all packaging before positioning the machine.

If possible, position the machine next to a water tap and a drain.

This dishwasher may be fed with either hot (max. 60°C) or cold water.

Nevertheless we advise a cold water supply.

A hot water supply is not always efficient with very soiled crockery as it

shortens the washing programmes.

Feeding the appliance with a hot water supply (max. 60°C) will allow you to

obtain considerably shorter programmes.

The water pressure must be within the limits given in the technical

specifications.

Your local Water Authority will advise you on the average mains pressure in

your area.

The dishwasher features fill and drain hoses which can be turned either to

the left or the right to suit the installation.

The locknut must be correctly fitted to avoid water leaks.

Avoid bends or kinks in the hose which could prevent or slow down the

water supply.

If the machine is connected to new pipes or pipes which have not been used

for a long time, you should run the water for a few minutes before

connecting the inlet hose. This will prevent

deposits of sand or rust clogging the inlet

hose filter.

For making the connection itself, the

coupling nut fitted to the machine's

supply hose is designed to screw onto

either a 3/4" inch gas thread spout, or to a

purpose made quick-coupling tap such as

the Press-block.

CA17