AEG FAVORIT 40850 User Information - Seite 23

Blättern Sie online oder laden Sie pdf User Information für Geschirrspüler AEG FAVORIT 40850 herunter. AEG FAVORIT 40850 40 Seiten. Electrolux user information dishwasher 40850
Auch für AEG FAVORIT 40850: User Information (48 seiten)

Seite drucken

What to do if...

Remedying small malfunctions

If one of the following fault codes is displayed in the multi-display dur-

ing operation:

– Fault codeÅ 10 (Problems with water inlet),

– Fault codeÅ 20 (Problems with water drainage),

please have a look at the following table.

When the fault is remedied, press the button for the cycle that has

started. The cycle will continue.

With other fault codes ("Å " followed by a number):

– Abort the dishwashing cycle.

– Switch the appliance off and on again.

– Re-set the dishwashing cycle.

If the fault is displayed again, please contact your local Service Force

Centre and inform them of the fault code.

Malfunction

The cycle indicator for the

selected dishwashing cycle

is flashing:

Å 10

fault code

played in the multi-dis-

play:

(Problems with water in-

let)

Possible cause

Water tap is blocked with

limescale or faulty.

The tap is turned off.

The filter (where present) in

the threaded hose fitting

on the tap is blocked.

is dis-

Filters in the base of the

dishwasher compartment

are blocked.

Water inlet hose

has not been correctly posi-

tioned.

Remedy

Check the water tap and

have it repaired if necessary.

Turn the tap on.

Clean the filter in the

threaded hose fitting.

Press the button for the

commenced dishwashing

cycle;

then abort the dishwashing

cycle (see section: Starting a

dishwashing cycle);

clean filters (see section:

Cleaning the filters).

Check the position of the

hose.