Garmin Reactor 40 Installationsanleitung Handbuch - Seite 15

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Schiffsausrüstung Garmin Reactor 40 herunter. Garmin Reactor 40 29 Seiten. Mechanical
Auch für Garmin Reactor 40: Installationsanleitung Handbuch (11 seiten), Installationsanleitung Handbuch (13 seiten), Konfigurationshandbuch (8 seiten), Installationsanleitung Handbuch (25 seiten)

Installing the Flat Bracket and Linkage Arm

You should use the flat bracket when installing the steering actuator on kicker motors with bolts or mounting

holes on the underside of the tiller arm, such as Yamaha motors.

1 Locate the mounting holes or bolts on the underside of the tiller arm on the kicker motor that align with the

holes on the bracket.

2 Complete an action:

• If your motor has bolts in the holes, remove and retain the bolts.

• If your motor does not have bolts in the holes, purchase the appropriate bolts for the holes.

3 Using the existing bolts or purchased bolts, secure the bracket

NOTE: If there is adequate clearance beneath the motor for you to tighten the bolts after the linkage is

assembled, you may find it easier to secure the bracket to the kicker motor tiller arm after you have

assembled the linkage.

4 Place the black nylon washer

5 With the wrench flats

threaded rod on the bracket.

6 Using an 11 mm (

7 Place a nylon washer

8 With the notched end of the linkage arm facing away from the bracket, place the linkage arm

bushing on the bracket.

9 Place the other nylon washer

10 With the narrow end of the nut

rod.

11 Using a 15 mm (

over the threaded rod on the bracket.

on the bushing

pointing away from the bracket, screw the bushing onto the

in.) wrench, tighten the bushing onto the bracket.

over the bushing on the bracket.

facing towards the bracket, screw the nut

in.) wrench, tighten the nut to secure the linkage arm to the bracket.

to the underside of the tiller arm.

onto the end of the threaded

over the