Garmin Reactor 40 Installationsanleitung Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Schiffsausrüstung Garmin Reactor 40 herunter. Garmin Reactor 40 29 Seiten. Mechanical
Auch für Garmin Reactor 40: Installationsanleitung Handbuch (11 seiten), Installationsanleitung Handbuch (13 seiten), Konfigurationshandbuch (8 seiten), Installationsanleitung Handbuch (25 seiten)

Power and Data Layout

When connecting the power cable, do not remove the in-line fuse holder. To prevent the possibility of injury or

product damage caused by fire or overheating, the appropriate fuse must be in place as indicated in the product

specifications. In addition, connecting the power cable without the appropriate fuse in place voids the product

warranty.

Item Description

Helm control

data cable

NMEA 2000

power cable

NMEA 2000

network

ECU

CCU

Important Considerations

A dedicated helm control is not included in all autopilot packages. If you install the

autopilot without a dedicated helm control, the autopilot CCU must be connected to

the same NMEA 2000

network as a compatible Garmin chartplotter to configure and

control the autopilot system.

You should install this cable only if you are connecting the autopilot to optional

NMEA

0183 devices, such as a wind sensor, a water-speed sensor, or a GPS device

(NMEA 0183 Connection Considerations, page

You should install this cable only if you are building a NMEA 2000 network. Do not

install this cable if there is an existing NMEA 2000 network on your boat.

You must connect the NMEA 2000 power cable to a 9 to 16 Vdc power source.

You must connect the helm control or compatible Garmin chartplotter and the CCU to

a NMEA 2000 network using the included T-connectors

Considerations, page

6).

If there is not an existing NMEA 2000 network on your boat, you can build one using

the supplied cables and connectors

Autopilot System, page

17).

You can mount the CCU in a non-submerged location near the center of the boat, in

any orientation

(CCU Mounting and Connection Considerations, page

Mount the CCU away from sources of magnetic interference.

WARNING

20).

(Building a Basic NMEA 2000 Network for the

(NMEA 2000 Connection

4).