Garmin 328 Handbuch für Piloten - Seite 6

Blättern Sie online oder laden Sie pdf Handbuch für Piloten für Marine Radio Garmin 328 herunter. Garmin 328 11 Seiten. Mode s transponder

Function Display

Altitude Trend Indicator

When the 'PRESSURE ALT' page is displayed, an arrow may be displayed to the right of

the altitude, indicating that the altitude is increasing or decreasing. One of two sizes of arrows

may be displayed depending on the vertical speed rate. The sensitivity of these arrows is set by

an authorized Garmin Aviation Service Center.

The GTX 328' s options are normally set at time of installation. To request any changes of

the GTX 328 parameters, contact an authorized Garmin Aviation Service Center.

PRESSURE ALT: Displays the altitude data supplied to the GTX 328 in feet,

hundreds of feet (i.e., ﬂight level), or meters, (dependent upon installation

conﬁguration.

FLIGHT TIME: Timer start is conﬁgured as either Manual or Automatic.

When Manual, displays the Flight Time, controlled by the START/STOP

and CLR keys. When Automatic, the timer begins when take off is sensed.

ALTITUDE MONITOR: Controlled by START/STOP Key. Activates a

voice alarm and warning annunciator when altitude limit is exceeded.

OAT/DALT: Displayed when the GTX 328 is conﬁgured with temperature

input. Displays Outside Air Temperature and Density Altitude.

COUNT UP TIMER: Controlled by START/STOP and CLR keys.

COUNT DOWN TIMER: Controlled by START/STOP, CLR, and CRSR

keys. The initial Count Down time is entered with the 0 – 9 keys.

CONTRAST: This page is only displayed if manual contrast mode is

selected during installation conﬁguration. Contrast is controlled by the 8

and 9 keys.

DISPLAY: This page is only displayed if manual backlighting mode is selected

during installation conﬁguration. Backlighting is controlled by the 8 and 9

keys.