Garmin Delta XC Series Benutzerhandbuch - Seite 9
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Haustierpflegeprodukt Garmin Delta XC Series herunter. Garmin Delta XC Series 14 Seiten.
Auch für Garmin Delta XC Series: Benutzerhandbuch (25 seiten)
Seite drucken
behavior. This occurs when the dog obeys commands while
wearing the dog collar device, but does not obey commands
when the device is removed. You should follow these tips to
prevent this behavior.
• Begin training the dog without using the Delta XC training
system to correct the dog
• Turn off the dog collar device and put it on the dog during
initial training.
This allows the dog to get used to the device before you start
using it to correct the dog.
• Turn off the dog collar device and put it on the dog outside of
your training sessions.
This allows the dog to get used to the device and helps to
prevent the dog from associating the presence of the device
with training or obedience.
• Reward the dog with praise whenever the dog obeys a
command.
Training the Dog to Heel and Sit with the Collar
Before you begin training your dog using the collar, your dog
must show a grasp of the "heel," "sit," and "come" commands
while on the leash, you must put on the collar
on Your
Dog), and you must find the correct intensity level
(Choosing the Correct Intensity
When beginning collar training, start with the "heel" and "sit"
commands.
1
With the dog at your side on a leash, pull up on the leash,
and command the dog to "sit."
2
If the dog does not sit immediately, press a training key
briefly, and repeat the command to "sit."
3
Reward the dog with praise when the dog obeys the
command.
After the dog begins obeying the "sit" command without collar
stimulation, you should move on to the "heel" command.
4
With the dog at your side on a leash and with the collar on,
command "heel" and begin walking forward while gently
pulling on the leash.
5
If the dog not heel, press a training key briefly, repeat the
command to "heel", and move in another direction or pull
back on the leash.
6
Reward the dog with praise when the dog obeys the
command.
Training the Dog to Come Here with the Collar
Before you begin training your dog to come "here" using the
collar, your dog must have a strong grasp of the "heel" and "sit"
commands using the collar, you must put on the collar
the Collar on Your
Dog), and you must find the correct intensity
level
(Choosing the Correct Intensity
to use a long leash to effectively train "here."
1
With the dog in a sitting position, move away to the end of the
leash.
2
Command the dog to come "here."
3
If the dog does not move immediately toward you, press a
training key briefly, gently tug on the leash, and repeat the
command to come "here."
4
Reward the dog with praise as soon as the dog begins to
move toward you.
5
If the dog begins to veer away, press a training key briefly,
and repeat the command to come "here."
BarkLimiter Mode
When you enable BarkLimiter mode, the handheld device
automatically activates a stimulation when the dog collar device
detects a bark.
Device Information
(Basic Training
Commands).
(Fitting the Collar
Level).
(Fitting
Level). Also, you may need
Enabling BarkLimiter Mode
When BarkLimiter mode is enabled, the device corrects the
dog's barks automatically.
Select
.
appears on the LCD display and the status LED on the dog
collar device flashes three times when the device enters
BarkLimiter mode.
TIP: Occasionally, the dog collar device may not enter
BarkLimiter mode if there is signal interference or if it is outside
the range of the handheld device. With
LCD display, you can select any training key to force the device
to enter BarkLimiter mode.
Changing the BarkLimiter Intensity Level
You can change the BarkLimiter intensity level based on your
training style and preferences.
When BarkLimiter mode is enabled, select
change the intensity level:
• Select U to set the stimulation for vibration only.
• Select A to enable Autorise. The system starts at the
lowest intensity level and increases the intensity level
automatically based on the dog's barking behavior. It may
take up to one minute for the system to increase to an
intensity level that discourages the dog from barking.
• Select 1 through 18 to set a specific intensity level.
Training with BarkLimiter
You can train your dog while BarkLimiter mode is turned on.
1
When BarkLimiter mode is active, select
and a three-letter training mode appear on the LCD
display.
2
Select a training mode
3
Select an intensity level
NOTE: When training mode is active, adjustments to the
intensity level apply only to the training keys. You can adjust the
BarkLimiter intensity level only when BarkLimiter mode is
activated and training mode is not active.
Device Information
Delta XC Handheld Device Specifications
Battery type
Battery life
Operating temperature range
Charging temperature range
Storage temperature range (up
to 1 mo.)
Storage temperature range (up
to 3 mo.)
Storage temperature range (up
to 1 yr.)
Water rating
Wireless range (Delta Upland
XC)
Wireless range (Delta Sport XC) 1.2 km (0.75 mi.)
Wireless range (Delta XC)
*The device withstands incidental exposure to water of up to 1 m
for up to 30 min. For more information, go to
/waterrating.
Delta XC Dog Collar Device Specifications
Battery type
Battery life
selected on the
or
.
(Selecting a Training
Mode).
(Changing the Intensity
Level).
Rechargeable, replaceable lithium-ion
60 hr., typical use
From -20° to 60°C (from -4° to 140°F)
From 0° to 40°C (from 32° to 104°F)
From -20° to 50°C (from -4° to 122°F)
From -20° to 40°C (from -4° to 104°F)
From -20° to 20°C (from -4° to 68°F)
IEC 60529 IPX7*
1.2 km (0.75 mi.)
0.8 km (0.5 mi.)
www.garmin.com
Rechargeable, replaceable lithium-ion
60 hr., typical use
to
5