Garmin T5 mini Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Haustierpflegeprodukt Garmin T5 mini herunter. Garmin T5 mini 24 Seiten. Dog collar device
Auch für Garmin T5 mini: Benutzerhandbuch (8 seiten), Schnellstart-Handbuch (10 seiten), Schnellstart-Handbuch (4 seiten)

Seite drucken
Garmin T5 mini Benutzerhandbuch

Changing Your Contact ID

If you are experiencing interference from other collars or
handheld devices in the area, you might need to change the
contact ID for your handheld device.
1
Select Setup > Contacts > Pairing Setup > ID.
2
Select a contact ID that is not yet assigned to another device
in the area.
If you select a contact ID that interferes with devices in the
area, you should select a new contact ID.
Each time a contact changes their contact ID, you must update
the contact ID in your handheld

Updating a Contact ID

If a contact has changed their contact ID
Contact
ID), you can quickly update the contact ID in your
handheld device.
1
Select
> Contacts.
2
Select the contact.
3
Select Show Info.
4
Select
> Change ID.
5
Select the contact ID that matches the contact's new contact
ID.
Hunting with the Alpha System
You can perform many tasks that are very helpful when you are
hunting with the Alpha system.
• Mark your truck's location
• Track your dogs
(Tracking Your Dog on the
• Track your fellow hunters
• Mark the location of a covey
• Send messages to your fellow hunters
to Your
Contacts).
• Turn on the collar light
(Turning On the Collar
• Put the collar into rescue mode to save battery power
(Turning On Rescue
Mode).
• Pause tracking while you move the dogs
Tracking).

Marking Your Truck Location

You can mark the location of the truck, so you can navigate
back to your truck after the hunt.
1
Select New Hunt.
2
Follow the on-screen instructions.

Marking a Covey

You can mark a covey location and enter the estimated number
of birds flushed and the number of birds taken.
1
Select Mark.
2
Select Covey.
3
Enter the number of birds flushed.
4
Enter the number of birds taken.
5
Select OK.

Turning On the Collar Light

You can turn on the LEDs on the collar at night to help locate a
dog or to warn drivers if a dog wanders near a road. The light is
visible for up to 100 yards.
1
Select Dog List.
2
Select a dog.
Hunting with the Alpha System
device(Updating a Contact
(Changing Your
(Marking Your Truck
Location).
Map).
(Tracking a
Contact).
(Marking a
Covey).
(Sending a Message
Light).
(Pausing Dog
3
Select Show Info.
4
Select
> Adjust Collar Light.
5
Select Continuous, Blink Slow, or Blink Fast.
TIP: Select different light setting for each dog to help you
identify the dogs in the field.

Turning On Rescue Mode

You can turn on rescue mode to conserve battery power at the
end of a long hunt or if your dog might get out of range.
1
Select Dog List.
ID).
2
Select a dog.
3
Select Show Info >
After you have turned on rescue mode, it stays on until you turn
it off.
When the collar battery power falls below 25%, the collar data
updates only once every 2 minutes.

Waypoints, Routes, and Tracks

Waypoints
Waypoints are locations you record and store in the device.

Marking Your Current Location

1
Select Mark.
2
Select an option:
• Select New.
• Select a default location name, such as Truck or Camp.
3
Select Save.
Marking a Waypoint Using the Map
1
Select
.
2
Select the location on the map.
3
Select the information bar along the top of the screen.
4
Select
> OK.
Editing a Waypoint
Before you can edit a waypoint, you must create a waypoint.
1
Select
> Waypoint Manager.
2
Select a waypoint.
3
Select an item to edit, such as the name.
4
Enter the new information.
5
Select
.
Repositioning a Waypoint to Your Current Location
You can change the position of a waypoint. For example, if you
move your vehicle, you can change the location to your current
position.
1
Select
> Waypoint Manager.
2
Select a waypoint.
3
Select
> Reposition Here.
The waypoint location changes to your current location.
Moving a Waypoint on the Map
1
Select
> Waypoint Manager.
2
Select a waypoint.
3
Select
> Move Waypoint.
4
Select the new location on the map.
5
Select Move.
> Rescue Mode.
7