LG 1200 Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Mobiltelefon LG 1200 herunter. LG 1200 40 Seiten. Lg cell phone user guide

Seite drucken
LG 1200 Benutzerhandbuch
indicates your phone is in vibrate mode.
_
indicates you have new text messages.
_
indicates you have voicemail messages. Press and hold to call your voicemail box.
_
indicates you have new text and voice messages.
_
indicates your phone's location feature is enabled. When Location is "Off," appears on the display screen.
_
shows your current battery charge strength.
_
(Icon is shown fully charged.)
Tip: Display indicators let you know when you're off the enhanced STi Mobile Coverage Area.
Features of Your STi Mobile LG
Congratulations on the purchase of your STi Mobile LG
It also offers many significant features and service options:
The built-in scheduler can be used to schedule alerts to remind you of important events (page 65).
_
One hundred ninety-nine internal phone book entries store up to five phone numbers each (page 57).
_
T9
Text input lets you quickly enter text by using one key press per letter (page 26).
®
_
Speed dialing lets you dial phone numbers by pressing one or two digits (page 25).
_
Built-in games offer an entertaining diversion (page 73).
_
More than a dozen preprogrammed ringers let you personalize your phone (page 31).
_

Turning Your Phone ON and OFF

Turning Your Phone ON

To turn your phone on, press
Once your phone is ON, it displays "Searching for Service" which indicates that your phone is searching for a signal.
When your phone finds a signal, it automatically enters standby mode – the phone's idle state. At this point, you are
ready to begin making and receiving calls.
If your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is automatically activated.
When a signal is found, your phone automatically returns to standby mode.
In Power Save mode, your phone searches for a signal periodically without your intervention. You can also initiate a
search for STi Mobile service by pressing any key (when your phone is turned ON).
Tip: The Power Save feature helps to conserve your battery power when you are in an area where there is no signal.
Turning Your Phone OFF
Press and hold
until you see the powering down message and animation (for example, "LG Goodbye!") on
END/
PWR
the display screen. Your screen remains blank while your phone is off (unless the battery is charging).

Using the Battery

Battery Capacity

Your STi Mobile phone is equipped with a Lithium Ion (LiIon) battery. It allows you to recharge your battery before it
is fully drained. The battery provides approximately 2.5 hours of continuous digital talk time or approximately
hours of continuous digital standby time. When there are approximately two minutes of talk time left, the phone
sounds an audible alert and then powers down.
Note: Long backlight settings, searching for service, vibrate mode and browser use affect the battery's talk and
standby times.
Tip: Be sure to watch your phone's battery level indicator and charge the battery before it runs out of power.

Installing the Battery

Your STi Mobile phone comes with a LiIon battery. Follow these steps to install it:
1. Place the battery in the opening at the back of the phone at a 45-degree angle with the metal contacts at the
bottom, facing downward.
2. Gently press down on the battery until the latch snaps into place.

Removing the Battery

To remove your battery, follow these easy steps:
1. Make sure the power is off so that you don't lose any stored numbers or messages.
1200
®
®
for approximately two seconds.
END/
PWR
1200. This phone is lightweight, easy-to-use, and reliable.
3
[48]